Now showing items 1261-1280 of 5597

    • CSA C68.10-14 

      Type: standard
      Source: CSA - CSA Group:;2014
      Organization : CSA - CSA Group
      Abstract: This Standard applies to the materials, construction, and testing of oneTo four-conductor cross-linked polyethylene and ethylene propylene rubber-insulated shielded power cables, rated 5–46 kV, that are used for the ...
    • CSA CAN/CSA-ISO/IEC 13869:04 

      Type: standard
      Source: CSA - CSA Group:;2012
      Organization : CSA - CSA Group
      Abstract: This International Standard specifies the signalling protocol for the support of the Call Transfer supplementary service (SS-CT) at the Q reference point between Private Integrated Network services eXchanges (PINXs) connected ...
    • CSA CAN/CSA-ISO/IEC 14496-5:06 AMD 9 

      Type: standard
      Source: CSA - CSA Group:;2011
      Organization : CSA - CSA Group
    • CSA CAN/CSA-ISO/IEC-13575-96 

      Type: standard
      Source: CSA - CSA Group:;2004
      Organization : CSA - CSA Group
      Abstract: This International Standard specifies a 50-pole connector, including the necessary mateability dimensions and the assignment of contact numbers, for use at the interface between data terminal equipment {DTE) and data circuit ...
    • CSA N290.14-07 

      Type: standard
      Source: CSA - CSA Group:;2007
      Organization : CSA - CSA Group
    • CSA C22.2 NO. 1335.2.15-93 

      Type: standard
      Source: CSA - CSA Group:;2008
      Organization : CSA - CSA Group
      Abstract: This clause of CSA Standard C22.2 No. 1335.1 is applicable except as follows:
      Addition
      This standard applies to
      (a) egg boilers;
      (b) milk heaters;
      (c) feeding-bottle heaters;
      (d) pressure ...
    • CSA N288.3.4-13 

      Type: standard
      Source: CSA - CSA Group:;2013
      Organization : CSA - CSA Group
      Abstract: Facilities
      Types of facilities
      Class I nuclear facilities
      This Standard addresses the design and execution of a nuclear air-cleaning system testing program for ...
    • CSA CAN/CSA-C22.2 NO. 80601-2-58-10 

      Type: standard
      Source: CSA - CSA Group:;2015
      Organization : CSA - CSA Group
      Abstract: CSA Preface
      This is the first edition of CAN/CSA-C22.2 No. 80601-2-58, Medical electrical equipment — Part 2-58: Particular requirements for the basic safety and essential performance ...
    • CSA CAN/CSA-C867.1-08 

      Type: standard
      Source: CSA - CSA Group:;2013
      Organization : CSA - CSA Group
      Abstract: This Standard specifies performance requirements for torchieres that use non-screw-in (Edison type) lamp bases and are intended primarily for residential use.
      Although this Standard largely deals with fluorescent ...
    • CSA CAN/CSA-E60335-2-5:12 

      Type: standard
      Source: CSA - CSA Group:;2012
      Organization : CSA - CSA Group
      Abstract: [Add the following]
      This Standard applies to the safety of such equipment designed and constructed for installation and use in accordance with the Rules of the Canadian Electrical Code, Part I.
      Products ...
    • CSA CAN/CSA-ISO/IEC 13816-08 

      Type: standard
      Source: CSA - CSA Group:;2008
      Organization : CSA - CSA Group
    • CSA S806-12 

      Type: standard
      Source: CSA - CSA Group:;2012
      Organization : CSA - CSA Group
      Abstract: General
      This Standard provides requirements for the design and evaluation of building components of fibre-reinforced polymers (FRP) in buildings and of building components reinforced with FRP materials. ...
    • CSA CAN/CSA-ISO/IEC 15938-3:04 AMD 1 

      Type: standard
      Source: CSA - CSA Group:;2012
      Organization : CSA - CSA Group
    • CSA C22.2 NO. 60-M1990 

      Type: standard
      Source: CSA - CSA Group:;2011
      Organization : CSA - CSA Group
    • CSA CAN/CSA-ISO/IEC 16500-5:02 

      Type: standard
      Source: CSA - CSA Group:;2010
      Organization : CSA - CSA Group
      Abstract: This part of ISO/IEC 16500 covers the high and mid layer protocols for DAVIC systems. It defines a set of protocol components ("tools") which are referenced by ISO/IEC 16500-2 ("System Dynamics, Scenarios, and Protocol ...
    • CSA CAN/CSA-C22.2 NO. 74-96 

      Type: standard
      Source: CSA - CSA Group:;2015
      Organization : CSA - CSA Group
      Abstract: These requirements apply to ballasts of the resistance, reactance, and electronic (solid state) types for use with fluorescent lamps, involving potentials of 2500 V to ground or less during either starting or running ...
    • CSA O86-09 

      Type: standard
      Source: CSA - CSA Group:;2009
      Organization : CSA - CSA Group
    • CSA Z11-12 

      Type: standard
      Source: CSA - CSA Group:;2012
      Organization : CSA - CSA Group
      Abstract: This Standard applies to common types of portable ladders and includes design and performance-related requirements and tests.
      Ladders covered by this Standard are intended for use by only one person at a time under ...
    • CSA C22.2 NO. 24-15 

      Type: standard
      Source: CSA - CSA Group:;2015
      Organization : CSA - CSA Group
      Abstract: This Standard applies to temperature-indicating and -regulating equipment* for voltages up to and including 600 V between conductors and intended for general household and industrial use in nonhazardous locations, in ...
    • CSA CAN/CSA-E968-99 

      Type: standard
      Source: CSA - CSA Group:;1999
      Organization : CSA - CSA Group
      Abstract: This Standard applies to seif-ballasted lamps intended for use in lighting equipment, designed to be installed on branch circuits not exceeding 750 V and used in accordance with the rules of the Canadian Electrical ...