درباره ما
JSA JIS E 4041
Rolling stock - Testing of rolling stock on completion of construction and before entry into service
Organization:
JSA - Japanese Standards Association
Year: 2014
Abstract: This Standard specifies general criteria to demonstrate by testing that railway vehicles, on completion of construction and before entry into service, conform with standards or other normative documents.
This Standard, as a whole or in part, applies to all railway vehicles except special purpose vehicles such as track-laying machines, ballast cleaners and personnel carriers. The extent of application of the standard for particular vehicles will be specifically mentioned in the contract.
NOTE 1 The parts of the standard which are applicable will depend on the type of vehicle (e.g. passenger, freight, powered trailer, etc.) (see tables A.1 and A.2).
NOTE 2 This Standard does not deal with tests carried out on components and equipment before fitting to the vehicle.
Insofar as this Standard is applicable it may be used for the following.
a) Generator sets mounted on a vehicle provided for auxiliary purposes.
b) The electrical or engine-driven traction systems used on trolley buses or similar vehicles.
c) Control equipment and auxiliary equipment on trailing vehicles not equipped with electrical or engine-driven traction systems.
d) Vehicles that are guided or supported without depending on adhesion between the wheels and rails and which are driven electrically or by engine.
NOTE 3 The International Standard corresponding to this Standard and the symbol of degree of correspondence are as follows.
IEC 61133 : 2006 Railway applications - Rolling stock Testing of rolling stock on completion of construction and before entry into service (MOD)
The symbols which denote the degree of correspondence in the contents between the relevant International Standard and JIS are IDT (identical), MOD (modified), and NEQ (not equivalent) according to ISOIIEC Guide 21.
This Standard, as a whole or in part, applies to all railway vehicles except special purpose vehicles such as track-laying machines, ballast cleaners and personnel carriers. The extent of application of the standard for particular vehicles will be specifically mentioned in the contract.
NOTE 1 The parts of the standard which are applicable will depend on the type of vehicle (e.g. passenger, freight, powered trailer, etc.) (see tables A.1 and A.2).
NOTE 2 This Standard does not deal with tests carried out on components and equipment before fitting to the vehicle.
Insofar as this Standard is applicable it may be used for the following.
a) Generator sets mounted on a vehicle provided for auxiliary purposes.
b) The electrical or engine-driven traction systems used on trolley buses or similar vehicles.
c) Control equipment and auxiliary equipment on trailing vehicles not equipped with electrical or engine-driven traction systems.
d) Vehicles that are guided or supported without depending on adhesion between the wheels and rails and which are driven electrically or by engine.
NOTE 3 The International Standard corresponding to this Standard and the symbol of degree of correspondence are as follows.
IEC 61133 : 2006 Railway applications - Rolling stock Testing of rolling stock on completion of construction and before entry into service (MOD)
The symbols which denote the degree of correspondence in the contents between the relevant International Standard and JIS are IDT (identical), MOD (modified), and NEQ (not equivalent) according to ISOIIEC Guide 21.
Collections
:
Show full item record
| contributor author | JSA - Japanese Standards Association | |
| date accessioned | 2017-09-04T17:52:37Z | |
| date available | 2017-09-04T17:52:37Z | |
| date copyright | 2009.04.28 (R 2014) | |
| date issued | 2014 | |
| identifier other | FCHQJFAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/175747 | |
| description abstract | This Standard specifies general criteria to demonstrate by testing that railway vehicles, on completion of construction and before entry into service, conform with standards or other normative documents. This Standard, as a whole or in part, applies to all railway vehicles except special purpose vehicles such as track-laying machines, ballast cleaners and personnel carriers. The extent of application of the standard for particular vehicles will be specifically mentioned in the contract. NOTE 1 The parts of the standard which are applicable will depend on the type of vehicle (e.g. passenger, freight, powered trailer, etc.) (see tables A.1 and A.2). NOTE 2 This Standard does not deal with tests carried out on components and equipment before fitting to the vehicle. Insofar as this Standard is applicable it may be used for the following. a) Generator sets mounted on a vehicle provided for auxiliary purposes. b) The electrical or engine-driven traction systems used on trolley buses or similar vehicles. c) Control equipment and auxiliary equipment on trailing vehicles not equipped with electrical or engine-driven traction systems. d) Vehicles that are guided or supported without depending on adhesion between the wheels and rails and which are driven electrically or by engine. NOTE 3 The International Standard corresponding to this Standard and the symbol of degree of correspondence are as follows. IEC 61133 : 2006 Railway applications - Rolling stock Testing of rolling stock on completion of construction and before entry into service (MOD) The symbols which denote the degree of correspondence in the contents between the relevant International Standard and JIS are IDT (identical), MOD (modified), and NEQ (not equivalent) according to ISOIIEC Guide 21. | |
| language | English | |
| title | JSA JIS E 4041 | num |
| title | Rolling stock - Testing of rolling stock on completion of construction and before entry into service | en |
| type | standard | |
| page | 103 | |
| status | Active | |
| tree | JSA - Japanese Standards Association:;2014 | |
| contenttype | fulltext |