JSA JIS C 8105-3

Abstract

This Standard specifies the general rules concerning the performance requirements and the acceptance inspection for general purpose luminaires (hereafter referred to as "luminaires") for electric light sources (incandescent lamps, fluorescent lamps, other discharge lamps, electroluminescent devices such as LED, hereafter referred to as "light sources") with supply voltage of not exceeding 1 000 V. <br>The performance requirements, test methods and inspection of LED luminaires shall be as specified in Annex A and Annex B. <br>For items of which the requirement is also found in the particular product standards of luminaire, the requirement in the particular standards shall apply. <br>NOTE: The general purpose luminaires as referred to in the above scope do not include the following. <br>a) Those which are always used in sites where ambient temperatures are especially high or low <br>b) Those which are used in sites where dust particles are in plenty <br>c) Those which are used in sites where corrosive gases, etc. are generated <br>d) Those which are used in sites where inflammable gases, etc. are generated <br>e) Those which are used in sites where oscillation is intense&#160; <br>f) Those which are used by being sunk under the water <br>g) Luminaires and signal lamps for vehicles <br>h) Emergency luminaires stipulated by Construction Standard Law and luminaires for emergency exit sign by Fire Service Law <br>i) Luminaires for takeoff and landing of aircrafts and aircraft warning light fixtures <br>j) Luminaires for medical use <br>k) Luminaires made for the purpose of incorporating into a machine, furniture, etc. <br>l) Luminaires for photography