درباره ما
JSA JIS L 1030-2
Testing methods for quantitative analysis of fibre mixtures of textiles - Part 2: Testing methods for quantitative analysis of fibre mixtures
Organization:
JSA - Japanese Standards Association
Year: 2012
Abstract: This Standard specifies three kinds of test methods, namely the release method, the dissolution method and the microscopy as the test methods for obtaining the mixture ratio of fibre mixed in textile goods. Before these test methods are applied, it is required that all fibres mixed in textile goods are identified. The fibre identification is specified in JIS L 1030-1.
Generally, for those textile products of fibre mixtures to which the release method is applicable, the release method shall be used, and for those to which it is not applicable, the dissolution method shall be used. For the textile products of fiber mixtures to which neither of the above methods is applicable, the microscopy shall be used.
WARNING: This Standard calls for the use of substances1) and/or procedures that may be injurious to health if adequate precautions are not taken. It refers only to technical suitability and does not absolve the user from legal obligations relating to health and safety at any stage. It has been assumed in the drafting of this Standard that the execution of its provisions is entrusted to people appropriately qualified and/or experienced in handling chemicals.
Note Information on substances which may damage the health is described in the Safety Data Sheet (SDS) in detail.
Generally, for those textile products of fibre mixtures to which the release method is applicable, the release method shall be used, and for those to which it is not applicable, the dissolution method shall be used. For the textile products of fiber mixtures to which neither of the above methods is applicable, the microscopy shall be used.
WARNING: This Standard calls for the use of substances1) and/or procedures that may be injurious to health if adequate precautions are not taken. It refers only to technical suitability and does not absolve the user from legal obligations relating to health and safety at any stage. It has been assumed in the drafting of this Standard that the execution of its provisions is entrusted to people appropriately qualified and/or experienced in handling chemicals.
Note Information on substances which may damage the health is described in the Safety Data Sheet (SDS) in detail.
Collections
:
-
Statistics
JSA JIS L 1030-2
Show full item record
| contributor author | JSA - Japanese Standards Association | |
| date accessioned | 2017-09-04T17:54:44Z | |
| date available | 2017-09-04T17:54:44Z | |
| date copyright | 2012.03.21 | |
| date issued | 2012 | |
| identifier other | FHZKIFAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/177844 | |
| description abstract | This Standard specifies three kinds of test methods, namely the release method, the dissolution method and the microscopy as the test methods for obtaining the mixture ratio of fibre mixed in textile goods. Before these test methods are applied, it is required that all fibres mixed in textile goods are identified. The fibre identification is specified in JIS L 1030-1. Generally, for those textile products of fibre mixtures to which the release method is applicable, the release method shall be used, and for those to which it is not applicable, the dissolution method shall be used. For the textile products of fiber mixtures to which neither of the above methods is applicable, the microscopy shall be used. WARNING: This Standard calls for the use of substances1) and/or procedures that may be injurious to health if adequate precautions are not taken. It refers only to technical suitability and does not absolve the user from legal obligations relating to health and safety at any stage. It has been assumed in the drafting of this Standard that the execution of its provisions is entrusted to people appropriately qualified and/or experienced in handling chemicals. Note Information on substances which may damage the health is described in the Safety Data Sheet (SDS) in detail. | |
| language | English | |
| title | JSA JIS L 1030-2 | num |
| title | Testing methods for quantitative analysis of fibre mixtures of textiles - Part 2: Testing methods for quantitative analysis of fibre mixtures | en |
| type | standard | |
| page | 181 | |
| status | Active | |
| tree | JSA - Japanese Standards Association:;2012 | |
| contenttype | fulltext |