درباره ما
ASME - ASME International: Recent submissions
Now showing items 681-700 of 1083
-
ASME A112.1002
Abstract: Scope:This Standard covers anti-siphon fill valves intended to be installed in water closet tanks.
ASME PTC 19.22
Abstract: OBJECT AND SCOPE
PTC 19.22 augments the ASME Performance Test Codes and other Instruments and Apparatus Supplements by providing guidance for reliable results when digital equipment is used. This Supplement includes ...ASME EA-3G
Abstract: This guidance document provides an application guide on how to utilize ASME EA-3, Energy Assessment for Steam Systems. This guidance document provides background and supporting information to assist in applying the standard. ...ASME B18.3.2M
Abstract: This standard contains the complete dimensional, mechanical and performance requirements for Metric Series Hexagon Keys and Bits of nominal sizes from 0.7 mm to 36 mm recognized as "American National Standard." They are ...ASME PCC-1
Abstract: The bolted flange joint assembly (BFJA) guidelines described in this document apply principally to pressure- boundary flanged joints with ring-type gaskets that are entirely within the circle enclosed by the bolt holes and ...ASME B31.4
Abstract: This Code prescribes requirements for the design, materials, construction, assembly, inspection, testing, operation, and maintenance of piping transporting liquids between production facilities, tank farms, natural gas ...ASME B30.2 INTERPRETATIONS
Abstract: Scope:
This publication includes all of the written replies issued between the indicated dates by the Secretary, speaking for the ASME B30 Committee, Safety Standards for Cableways, ...ASME B5.18
Abstract: FOREWORD
The first edition of this standard, known as BS.18-1943, resulted from intensive efforts dating back to 1926 by a special group of milling machine manufactures; it was reaffirmed in 1949, ...ASME MFC-6
Abstract: This Standard
(a) describes the use of vortex flowmeters, including their physical components, principle of operation, installation, performance, influence factors, and calibration in a closed conduit running ...ASME PTC 2
Abstract: OBJECT AND SCOPE
This Code contains standards for terms, units of measure, values of constants, symbols, and technical nomenclature that are to be used in all individual test codes. The implication of the words ...ASME B20.1
Abstract: This Standard applies to the design, construction, installation, maintenance, inspection, and operation of conveyors and conveying systems in relation to hazards. The conveyors may be of the bulk material, package, or ...ASME B18.21.2M
Abstract: This Standard covers the dimensions, physical properties, and methods of testing for helical spring and tooth lock washers.
The inclusion of dimensional data in this Standard is not intended to imply that all products ...ASME NTB-1
Abstract: SCOPE OF THE TRAINING MATERIAL
ASME/ANS Standard is divided into ten parts as follows.
Part 1: General Requirements for a Level 1 PRA, including Large Early Release Frequency
Part 2: Requirements ...ASME MFC-12M
Abstract: This Standard, provides information on the use of multiport averaging Pitot head-type devices used to measure liquids and gases. The Standard applies when the conduits are full and the flow
(a) has a fully ...ASME FFS-2
Abstract: Example problems illustrating the use and calculations required for Fitness-For-Service Assessments described in API 579-1/ASME FFS-1 are provided in this document. Example problems are provided for all calculation procedures ...ASME B30.11
Abstract: Volume B30.11 includes provisions that apply to the construction, installation, operation, inspection, testing, and maintenance of underhung crane and monorail systems, track sections, and load-carrying members, such as ...ASME Y14.43
Abstract: This Standard presents the design practices for dimensioning and tolerancing of gages and fixtures used for the verification of maximum material condition (MMC) size envelopes and virtual condition boundaries generated by ...ASME A112.6.2
Abstract: This Standard establishes minimum performance requirements for framing-affixed supports for off-the-floor water closets with concealed tanks. It is not intended to limit the use of other materials, finishes, and designs ...ASME STP-PT-032
Abstract: Buckling of cylindrical pressure vessels under axial compression and bending is normally evaluated using the axial compression stress evaluation design methods in ASME Section VIII, Division 1. In 1998 the ASME Boiler and ...ASME A90.1 INTERPRETATIONS
Abstract: This publication includes written replies issued in the year indicated by the Secretary, speaking for the ASME A90 Committee, to inquiries concerning interpretations of technical aspects of ASME A90.1.
These replies ...