درباره ما
ASME - ASME International: Recent submissions
Now showing items 941-960 of 1083
-
ASME A17.7.1
Abstract: This document provides guidance for the use of ISO/IEC Guide 65 as applied to an Accredited Elevator/Escalator Certification Organization (AECO) accredited by ANSI, ASME or SCC operating an A17.7/B44.7 certification system. ... -
ASME B5.56M
Abstract: Scope
The requirements of this Standard apply to power shears used to cut metal by shearing, utilizing a fixed lower knife(s) and a non-rotary, moving upper knife(s). This Standard applies to those shears ... -
ASME STP-PT-043
Abstract: The effect of flaws with and without cyclic loading was investigated on a composite overwrapped pressure vessel with a non-load sharing polymer liner. Flaws were machined in the structure to four depths and then were cycled ... -
ASME Y32.18
Abstract: This document presents standard symbols and definitions that may be used in constructing schematic diagrams for mechanical and acoustical systems whose performances are describable by finite sets of scalar variables. ... -
ASME PTC 23
Abstract: This Code provides rules for determining the performance of all referenced cooling equipment with regard to the thermal capability, deviation from design thermal capability, or deviation from design cold water temperature. ... -
ASME EA-1
Abstract: This Standard covers process heating systems that are defi ned as a group (or a set or combination) of heating equipment used for heating materials in the production of goods in an industrial plant. These systems, commonly ... -
ASME B18.15
Abstract: This Standard is limited to dimensions and capacities for carbon steel and corrosion-resistant stainless steel, forged threaded eyebolts intended primarily for lifting applications. For carbon steel construction, the sizes ... -
ASME B30.13 INTERPRETATIONS
Abstract: Scope:
This publication includes all of the written replies issued between the indicated dates by the Secretary, speaking for the ASME B30 Committee, Safety Standard for Cableways, ... -
ASME B36.19M
Abstract: This Standard covers the standardization of dimensions of welded and seamless wrought stainless steel pipe for high or low temperatures and pressures.
The word pipe is used, as distinguished from tube, ... -
ASME A17.2
Abstract: This Guide covers recommended inspection and testing procedures for electric and hydraulic elevators, escalators, and moving walks required to conform to the Safety Code for Elevators and Escalators, A17.1–1955 and ... -
ASME PTC 12.3
Abstract: This Code applies to deaerating heaters and deaerators equipped with either shell-and-tube or direct contact, vent-condensing sections.
The Code describes the test method and procedures for thed etermination of dissolved ... -
ASME B18.8.1 ERTA
Abstract: This Standard covers the complete dimensional and general data for clevis pins and cotter (split) pins recognized as American National Standard.
The inclusion of dimensional data in this Standard is not intended to imply ... -
ASME STP-PT-023
Abstract: The purpose of this document is to provide recommendations for the procedures to be used for the inservice inspection of composite tanks used in the storage and transportation of high pressure hydrogen and to provide ... -
ASME B16.14
Abstract: This Standard covers the following:
(a) pressure–temperature ratings
(b) size
(c) marking
(d) materials
(e) dimensions and tolerances ... -
ASME PTC 23.1
Abstract: The object of this Code is to provide methods and procedures for testing water spray cooling systems under normal use as follows:
(a) To determine overall performance of spray cooling systems, including thermal ... -
ASME A112.6.1M
Abstract: This Standard applies to floor-affixed supports for off-the-floor plumbing fixtures, including combination carriers and waste fittings for water closets, and carriers for urinals, lavatories, sinks, and water coolers. This ... -
ASME B29.100
Abstract: FOREWORD
For the first edition of ASME B29.100, the B29 Standards Committee agreed to propose a draft standard to consolidate and revise the following three chain standards: ASME B29.1M, Precision Power ... -
ASME EA-1G
Abstract: This guidance document provides an application guide on how to utilize ASME EA-1, Energy Assessment for Process Heating Systems. This guidance document provides background and supporting information to assist in applying ... -
ASME V&V 20
Abstract: OBJECTIVE AND SCOPE
The objective of this Standard is the specification of a verification and validation approach that quantifies the degree of accuracy inferred from the comparison of solution ...