درباره ما
ASME - ASME International: Recent submissions
Now showing items 961-980 of 1083
-
ASME B16.5 INTERPRETATIONS
Abstract: Scope:
As a service to persons who use the B16 standards, the B16 Committee renders interpretations of the requirements upon request. The procedure for requesting an interpretation ... -
ASME B31.5 INTERPRETATIONS
Abstract: It has been agreed to publish interpretations issued by the B31 Committee concerning B31.5 as part of the update service to the Code. The interpretations have been assigned numbers in chronological order. An interpretation ... -
ASME B30.2
Abstract: The ASME B30 Standard contains provisions that apply to the construction, installation, operation, inspection, testing, maintenance, and use of cranes and other lifting and material-movement related equipment. For the ... -
ASME B94.6
Abstract: SCOPE AND PURPOSE
This Standard covers knurling tolls with standardized diametral pitches and includes dimensional relations with stock in the production of straight, diagonal, and diamond knurling on ... -
ASME STP-SA-055
Abstract: The purpose of this publication is to provide guidance the users, manufacturers and specifies of mobile cranes by identifying relevant documents/standards that may be applicable to mobile cranes. This publication identifies ... -
ASME TDP-2
Abstract: This Standard includes practices that are concerned primarily with the prevention of water damage to steam turbines used for water-cooled nuclear reactor power generation. The practices cover design, operation, inspection, ... -
ASME A112.18.1
Abstract: This Standard covers plumbing supply fittings and accessories located between the supply stop and the terminal fitting, inclusive, as follows:
(a) automatic compensating valves for individual wall-mounted showering ... -
ASME STP-NU-041
Abstract: INTRODUCTION
STP-NU-018 [3] investigated existing creep-fatigue rules to improve the provisions on creep-fatigue evaluation of Mod.9Cr-1Mo steel in Subsection NH of ASME Boiler and Pressure Vessel Code ... -
ASME PTC 19.10
Abstract: Presented are descriptions of methods, apparatus, and calculations which are used in conjunction with Performance Test Codes to determine quantitatively, the gaseous constituents of exhausts resulting from stationary ... -
ASME BTH-1
Abstract: This Standard provides minimum structural and mechanical design and electrical component selection criteria for ASME B30.20, Below-the-Hook Lifting Devices.
The provisions in this Standard apply to the design or ... -
ASME B32.100
Abstract: This Standard establishes a preferred series of metric thicknesses, widths, and lengths for flat metal products of rectangular cross-section. The thicknesses and widths shown in this Standard are also applicable to base ... -
ASME B18.16.4
Abstract: This Standard covers the complete general, dimensional, mechanical, and performance data for carbon steel, inch series nylon insert locknuts of property grades NE2, NE5, and NE8 designated as American National Standard. ... -
ASME Y14.2
Abstract: This Standard establishes the line and lettering practices for use in the preparation of drawings, including the recognition of the requirements for computer aided design (CAD) and manually prepared drawings. When no ... -
ASME A18.1
Abstract: Equipment Covered by This Standard. This safety Standard covers the design, construction, installation, operation, inspection, testing, maintenance, and repair of inclined stairway chairlifts and inclined ... -
ASME B16.38
Abstract: Valve Types
This Standard covers requirements for manually operated metallic valves in nominal sizes 21⁄2 (DN 65) through 12 (DN 300) having the inlet and outlet on a common centerline. These ... -
ASME MFC-19G
Abstract: INTRODUCTION
This Technical Report discusses the existing definitions of "wet gas flow" and provides suggested definitions for use. Common wet gas flowmetering terminologies, principles, and limitations ... -
ASME PTC 11
Abstract: The scope of this Code is limited to the testing of fans after they have been installed in the systems for which they were intended. However, the same directions can be followed in a laboratory test. (The laboratory test ... -
ASME B5.48
Abstract: This standard covers definitions, classes of ball screws, recommended combinations of screw diameters and leads, recommended drawing format, and performance characteristics of ball screw and nut assemblies as applied ... -
ASME B18.2.7.1M
Abstract: This Standard covers the complete general and dimensional data for metric 12-spline flange screws recognized as American National Standard.
The inclusion of dimensional data in this Standard is not intended to ...