درباره ما
AASHTO TP5
Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) - 2000 Edition
Year: 1998
Abstract: This test method covers the determination of the dynamic shear modulus and phase angle of asphalt binder when tested in dynamic (oscillatory) shear using parallel plate test geometry. It is applicable to asphalt binders having dynamic shear modulus values in the range from 100 Pa to 10 MPa. This range in modulus is typically obtained between 5°C and 85°C. This test method is intended for determining the linear viscoelastic properties of asphalt binders as required for specification testing and is not intended as a comprehensive procedure for the full characterization of the viscoelastic properties of asphalt binder.
This standard is appropriate for unaged material or material aged in accordance with n40, PPI, or "240 and PP1.
Particulate material in the asphalt binder is limited to particles with longest dimensions less than 250 µm.
This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this procedure to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.
This standard is appropriate for unaged material or material aged in accordance with n40, PPI, or "240 and PP1.
Particulate material in the asphalt binder is limited to particles with longest dimensions less than 250 µm.
This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this procedure to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.
Show full item record
| contributor author | AASHTO - American Association of State Highway and Transportation Officials | |
| date accessioned | 2017-09-04T17:58:51Z | |
| date available | 2017-09-04T17:58:51Z | |
| date copyright | 01/01/1998 | |
| date issued | 1998 | |
| identifier other | FSSMMAAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/182021 | |
| description abstract | This test method covers the determination of the dynamic shear modulus and phase angle of asphalt binder when tested in dynamic (oscillatory) shear using parallel plate test geometry. It is applicable to asphalt binders having dynamic shear modulus values in the range from 100 Pa to 10 MPa. This range in modulus is typically obtained between 5°C and 85°C. This test method is intended for determining the linear viscoelastic properties of asphalt binders as required for specification testing and is not intended as a comprehensive procedure for the full characterization of the viscoelastic properties of asphalt binder. This standard is appropriate for unaged material or material aged in accordance with n40, PPI, or "240 and PP1. Particulate material in the asphalt binder is limited to particles with longest dimensions less than 250 µm. This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this procedure to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use. | |
| language | English | |
| title | AASHTO TP5 | num |
| title | Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) - 2000 Edition | en |
| type | standard | |
| page | 10 | |
| status | Withdrawn | |
| tree | AASHTO - American Association of State Highway and Transportation Officials:;1998 | |
| contenttype | fulltext |