درباره ما
ECA TEP105-8
Raster Response Measurement for Monochrome Cathode Ray Tubes
Organization:
ECIA - Electronic Components Industry Association
Year: 1987
Abstract: The purpose of this test is to measure the resolution capability of a cathode ray display tube.
Raster scan is the most widely used method of displaying information on a CRT. The test described in this section gives a figure of merit related to the resolution of the display tube. The resolution is dependent on:
1. The electron beam distribution as it is focussed onto the phosphor screen.
2. Electron scatter and light scatter due to the granular nature of the phosphor and the aluminum backing of the screen.
3. Saturation of the phosphor.
4. Internal reflections within the faceplate and panels mounted onto the faceplate.
5. Optical effects of coatings, etchings, etc., on the faceplate and panel.
Other external influences including ambient light are not addressed in this method. As well, the transfer characteristics of the viewing system are not considered.
Raster scan is the most widely used method of displaying information on a CRT. The test described in this section gives a figure of merit related to the resolution of the display tube. The resolution is dependent on:
1. The electron beam distribution as it is focussed onto the phosphor screen.
2. Electron scatter and light scatter due to the granular nature of the phosphor and the aluminum backing of the screen.
3. Saturation of the phosphor.
4. Internal reflections within the faceplate and panels mounted onto the faceplate.
5. Optical effects of coatings, etchings, etc., on the faceplate and panel.
Other external influences including ambient light are not addressed in this method. As well, the transfer characteristics of the viewing system are not considered.
Collections
:
Show full item record
| contributor author | ECIA - Electronic Components Industry Association | |
| date accessioned | 2017-09-04T17:59:08Z | |
| date available | 2017-09-04T17:59:08Z | |
| date copyright | 01/01/1987 | |
| date issued | 1987 | |
| identifier other | FTGXCAAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/182215 | |
| description abstract | The purpose of this test is to measure the resolution capability of a cathode ray display tube. Raster scan is the most widely used method of displaying information on a CRT. The test described in this section gives a figure of merit related to the resolution of the display tube. The resolution is dependent on: 1. The electron beam distribution as it is focussed onto the phosphor screen. 2. Electron scatter and light scatter due to the granular nature of the phosphor and the aluminum backing of the screen. 3. Saturation of the phosphor. 4. Internal reflections within the faceplate and panels mounted onto the faceplate. 5. Optical effects of coatings, etchings, etc., on the faceplate and panel. Other external influences including ambient light are not addressed in this method. As well, the transfer characteristics of the viewing system are not considered. | |
| language | English | |
| title | ECA TEP105-8 | num |
| title | Raster Response Measurement for Monochrome Cathode Ray Tubes | en |
| type | standard | |
| page | 7 | |
| status | Active | |
| tree | ECIA - Electronic Components Industry Association:;1987 | |
| contenttype | fulltext |