AWS A10.1M
Specification for Calibration and Performance Testing of Secondary Current Sensing Coils and Weld Current Monitors used in Single-Phase AC Resistance Welding - 1st Edition
Organization:
AWS - American Welding Society
Year: 2007
Abstract: This specification sets forth accepted methods for testing and reporting the performance characteristics of Rogowski-type air core Current Sensing Coils (CSCs) and the Weld Current Monitors (WCMs) used in the measurement of secondary current in single-phase ac resistance welding. CSCs mounted inside transformers are not included in this specification. Traceability of measurements to National Standards as required by this specification is discussed. References regarding traceability concepts and requirements are provided. Sources of measurement uncertainty, methods of combining these uncertainties, and the manner in which the overall uncertainty is to be stated are discussed.
This standard makes sole use of SI units.
Safety and health issues and concerns are beyond the scope of this standard and therefore are not addressed herein. Safety and health information is available from other sources, including, but not limited to, applicable federal and state regulations.
This standard makes sole use of SI units.
Safety and health issues and concerns are beyond the scope of this standard and therefore are not addressed herein. Safety and health information is available from other sources, including, but not limited to, applicable federal and state regulations.
Collections
:
Show full item record
contributor author | AWS - American Welding Society | |
date accessioned | 2017-09-04T18:04:11Z | |
date available | 2017-09-04T18:04:11Z | |
date copyright | 2007.03.05 | |
date issued | 2007 | |
identifier other | GGFFACAAAAAAAAAA.pdf | |
identifier uri | https://yse.yabesh.ir/std/handle/yse/187109 | |
description abstract | This specification sets forth accepted methods for testing and reporting the performance characteristics of Rogowski-type air core Current Sensing Coils (CSCs) and the Weld Current Monitors (WCMs) used in the measurement of secondary current in single-phase ac resistance welding. CSCs mounted inside transformers are not included in this specification. Traceability of measurements to National Standards as required by this specification is discussed. References regarding traceability concepts and requirements are provided. Sources of measurement uncertainty, methods of combining these uncertainties, and the manner in which the overall uncertainty is to be stated are discussed. This standard makes sole use of SI units. Safety and health issues and concerns are beyond the scope of this standard and therefore are not addressed herein. Safety and health information is available from other sources, including, but not limited to, applicable federal and state regulations. | |
language | English | |
title | AWS A10.1M | num |
title | Specification for Calibration and Performance Testing of Secondary Current Sensing Coils and Weld Current Monitors used in Single-Phase AC Resistance Welding - 1st Edition | en |
type | standard | |
page | 56 | |
status | Active | |
tree | AWS - American Welding Society:;2007 | |
contenttype | fulltext |