درباره ما
AASHTO T 256
Standard Method of Test for Pavement Deflection Measurements
Year: 2016
Abstract: This test method provides standards for measuring pavement surface deflections, directly under, or at locations radially outward (offset) from a known static, steady-state, or impulse load. Deflections are measured with sensors that monitor the vertical movement of a pavement surface due to the load. This test method describes procedures for the deflection measurement using various deflection testing devices and provides the general information that should be obtained regardless of the type of testing device used.
This test method is applicable for deflection measurements performed on flexible asphalt concrete (AC), rigid portland cement concrete (PCC), or composite (AC/PCC) pavements. Rigid pavements may be plain, jointed, jointed reinforced, or continuously reinforced or fractured concrete.
The values stated in SI units are to be regarded as standard. The U.S. Customary system of units given in parentheses is for information purposes only. This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
This test method is applicable for deflection measurements performed on flexible asphalt concrete (AC), rigid portland cement concrete (PCC), or composite (AC/PCC) pavements. Rigid pavements may be plain, jointed, jointed reinforced, or continuously reinforced or fractured concrete.
The values stated in SI units are to be regarded as standard. The U.S. Customary system of units given in parentheses is for information purposes only. This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Show full item record
| contributor author | AASHTO - American Association of State Highway and Transportation Officials | |
| date accessioned | 2017-09-04T18:06:45Z | |
| date available | 2017-09-04T18:06:45Z | |
| date copyright | 2001.01.01 (R 2016) | |
| date issued | 2016 | |
| identifier other | GNEAPFAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/189678 | |
| description abstract | This test method provides standards for measuring pavement surface deflections, directly under, or at locations radially outward (offset) from a known static, steady-state, or impulse load. Deflections are measured with sensors that monitor the vertical movement of a pavement surface due to the load. This test method describes procedures for the deflection measurement using various deflection testing devices and provides the general information that should be obtained regardless of the type of testing device used. This test method is applicable for deflection measurements performed on flexible asphalt concrete (AC), rigid portland cement concrete (PCC), or composite (AC/PCC) pavements. Rigid pavements may be plain, jointed, jointed reinforced, or continuously reinforced or fractured concrete. The values stated in SI units are to be regarded as standard. The U.S. Customary system of units given in parentheses is for information purposes only. This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. | |
| language | English | |
| title | AASHTO T 256 | num |
| title | Standard Method of Test for Pavement Deflection Measurements | en |
| type | standard | |
| page | 12 | |
| status | Active | |
| tree | AASHTO - American Association of State Highway and Transportation Officials:;2016 | |
| contenttype | fulltext |