درباره ما
AASHTO T 241
Standard Method of Test for Helical Continuously Welded Seam Corrugated Steel Pipe
Year: 2012
Abstract: This method describes the procedure to be used in determining the quality of the seam or helical, continuously welded seam, corrugated steel pipe. The procedure to be used involves distorting a short length of welded seam by using a 25-mm diameter, hemispherical punch and a 38-mm inside diameter contoured die. The resulting distorted weld area will hereafter be called the "cup."
At the option of the engineer, or in the event of a disagreement between the engineer and fabricator, the referee test described in Section 4 will be performed.
At the option of the engineer, or in the event of a disagreement between the engineer and fabricator, the referee test described in Section 4 will be performed.
Show full item record
| contributor author | AASHTO - American Association of State Highway and Transportation Officials | |
| date accessioned | 2017-09-04T18:25:52Z | |
| date available | 2017-09-04T18:25:52Z | |
| date copyright | 01/01/1995 (R 2012) | |
| date issued | 2012 | |
| identifier other | AHSXXEAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/208040 | |
| description abstract | This method describes the procedure to be used in determining the quality of the seam or helical, continuously welded seam, corrugated steel pipe. The procedure to be used involves distorting a short length of welded seam by using a 25-mm diameter, hemispherical punch and a 38-mm inside diameter contoured die. The resulting distorted weld area will hereafter be called the "cup." At the option of the engineer, or in the event of a disagreement between the engineer and fabricator, the referee test described in Section 4 will be performed. | |
| language | English | |
| title | AASHTO T 241 | num |
| title | Standard Method of Test for Helical Continuously Welded Seam Corrugated Steel Pipe | en |
| type | standard | |
| page | 5 | |
| status | Active | |
| tree | AASHTO - American Association of State Highway and Transportation Officials:;2012 | |
| contenttype | fulltext |