MIL-DTL-15024F

Abstract

This performance specification covers the physical characteristics of plates, tags and bands (identification devices) used for identification of equipment. Examples of information to be marked on the identification devices are covered in the applicable specification sheets. <br>Identification devices will be one of the following types, as specified (see <a>6.2</a>): </span><pre> Type A Etched or chemically engraved plate Type B Engraved plate Type C Stamped plate Type D Cast plate Type E Screen or litho print plate Type F Laminated plate Type G Adhesive-backed plate Type H Photosensitive plate Type J Tag Type K1 Cable Band Type K2 Cable Band (Heat shrinkable) Type L Laser generated plate</pre> <br> <strong>Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Commander, Naval Air Warfare Center Aircraft Division, Code 414100B120-3, Highway 547, Lakehurst, NJ 08733-5100, by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.</strong> <br><b><u>Intended Use:</u></b> The plates, tags, and bands covered by this specification are intended to identify electrical, electronic, or mechanical equipment; or when required for the installation, use, operation, or maintenance of these equipment items. <br>