MIL-T-85601

NAVY - AS - Naval Air Systems Command

TEST SET, INDICATOR AN/APM-433

Organization:

Year: 1983

Abstract: The test equipment covered by this specification shall be for shop use and shall provide an accurate means of testing the ID-2206/APN-194(V) Height Indicator when used with the AN/APM-403 Test Set, Altimeter Set.
The test equipment covered by this specification shall consist of the following item:

                                               Applicable           Item          Type Designation       Paragraph            Test Set        AN/APM-433            3.5.1

The test set shall be Type I, Class 4, and shall be housed in an enclosure that is Style C, Color Y, as defined in MIL-T-28800.
This equipment shall operate with the associated equipment listed in paragraph 6.10.
The following documents of the issue in effect on the date of invitation for bids or request for proposal, form a part of this specification to the extent specified herein. Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Commanding Officer, Naval Air Engineering Center, Engineering Specifications and Standards Department (ESSD) Code 93, Lakehurst, NJ 08733, by using the self addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.

   SPECIFICATIONS          Military          MIL-C-5541          Coatings, Chem. Conversion          MIL-P-15024         Plates, Tags, and Bands for Identification of                             Equipment          MIL-E-17555         Electronic and Electrical Equipment and Associated                             Repair Parts, Preparation for Delivery of          MIL-D-18300         Design Data for Avionics Equipment          MIL-N-18307         Nomenclature and Nameplate for Aeronautical                             Electronic and Associated Equipment          MIL-T-28800         Test Equipment for Use with Electronic and                             Electrical Equipment, General Specification for     STANDARDS          Military          MIL-STD-108         Definition and Requirement/Enclosure for                             Electrical Equipment          MIL-STD-415         Test Points and Test Facilities for Electronic                             Systems and Associated Equipment          MIL-STD-461         EMI Characteristics, Requirement for Equipment          MIL-STD-462         EMI Characteristics, Measurement of          MIL-STD-704         Electric Power, Aircraft, Characteristics and                             Utilization of

(Copies of specifications, standards, drawings and publications required by contractors in connection with specific procurement functions should be obtained from the procuring activity or as directed by the contracting officer.)
Intended Use: The equipment defined herein is for detailed testing of the ID-2206/APN-194(V) Height Indicator, Table I, when used in conjunction with the AN/APM-403 Altimeter Set Test Set.

URI: https://yse.yabesh.ir/std/handle/yse/71884

Collections :

NAVY - AS - Naval Air Systems Command

Show full item record

contributor author	NAVY - AS - Naval Air Systems Command
date accessioned	2017-09-04T16:08:39Z
date available	2017-09-04T16:08:39Z
date copyright	03/01/1983
date issued	1983
identifier other	SERPDAAAAAAAAAAA.pdf
identifier uri	https://yse.yabesh.ir/std/handle/yse/71884
description abstract	The test equipment covered by this specification shall be for shop use and shall provide an accurate means of testing the ID-2206/APN-194(V) Height Indicator when used with the AN/APM-403 Test Set, Altimeter Set. The test equipment covered by this specification shall consist of the following item: Applicable Item Type Designation Paragraph Test Set AN/APM-433 3.5.1 The test set shall be Type I, Class 4, and shall be housed in an enclosure that is Style C, Color Y, as defined in MIL-T-28800. This equipment shall operate with the associated equipment listed in paragraph 6.10. The following documents of the issue in effect on the date of invitation for bids or request for proposal, form a part of this specification to the extent specified herein. Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Commanding Officer, Naval Air Engineering Center, Engineering Specifications and Standards Department (ESSD) Code 93, Lakehurst, NJ 08733, by using the self addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. SPECIFICATIONS Military MIL-C-5541 Coatings, Chem. Conversion MIL-P-15024 Plates, Tags, and Bands for Identification of Equipment MIL-E-17555 Electronic and Electrical Equipment and Associated Repair Parts, Preparation for Delivery of MIL-D-18300 Design Data for Avionics Equipment MIL-N-18307 Nomenclature and Nameplate for Aeronautical Electronic and Associated Equipment MIL-T-28800 Test Equipment for Use with Electronic and Electrical Equipment, General Specification for STANDARDS Military MIL-STD-108 Definition and Requirement/Enclosure for Electrical Equipment MIL-STD-415 Test Points and Test Facilities for Electronic Systems and Associated Equipment MIL-STD-461 EMI Characteristics, Requirement for Equipment MIL-STD-462 EMI Characteristics, Measurement of MIL-STD-704 Electric Power, Aircraft, Characteristics and Utilization of (Copies of specifications, standards, drawings and publications required by contractors in connection with specific procurement functions should be obtained from the procuring activity or as directed by the contracting officer.) Intended Use: The equipment defined herein is for detailed testing of the ID-2206/APN-194(V) Height Indicator, Table I, when used in conjunction with the AN/APM-403 Altimeter Set Test Set.
language	English
title	MIL-T-85601	num
title	TEST SET, INDICATOR AN/APM-433	en
type	standard
page	16
status	Active
tree	NAVY - AS - Naval Air Systems Command:;1983
contenttype	fulltext