MIL-T-81772B

Abstract

This specification covers the requirements for three types of thinner to be used in reducing aircraft coatings. <b><u>Intended Use:</u></b> The thinner covered by this specification is intended for use in reducing aircraft coatings to the required viscosity (see <a>1.2</a>). <pre>*Type I - Polyurethane thinner is intended for use with: <cite>MIL-C-83231</cite> - Coating, Polyurethane, Rain Erosion Resistant for Exterior Aircraft and Missile Plastic Parts <cite>MIL-C-83286</cite> - Coating, Urethane, Aliphatic Isocyanate, For Aerospace Applications <cite>MIL-C-85285</cite> - Coating, Polyurethane, Aliphatic, Weather Resistant, Low Infra-Red (IR) Reflective <cite>MIL-C-85322</cite> - Coating, Elastomeric, Polyurethane, Rain-Erosion Resistant Type II - Epoxy thinner is intended for use with: <cite>MIL-C-22750</cite> - Coating, Epoxy-Polyamide <cite>MIL-P-23377</cite> - Primer Coating, Epoxy Polyamide, Chemical and Solvent Resistant Type III - Acrylic and alkyd thinner is intended for use with: <cite>TT-L-20</cite> - Lacquer, Camouflage. <cite>TT-L-32</cite> - Lacquer, Cellulose Nitrate, Gloss. <cite>TT-P-1757</cite> - Primer Coating, Zinc Chromate, Low-Moisture Sensitivity <cite>TT-P-7962</cite> - Primer Coating, Cellulose Nitrate, Modified Alkyd Type, Corrosion Inhibiting, Fast-Drying. <cite>MIL-L-19537</cite> - Lacquer, Acrylic-Nitrocellulose Gloss (For Aircraft Use) <cite>MIL-L-19538</cite> - Lacquer, Acrylic Nitrocellulose, Camouflage (For Aircraft Use) <cite>MIL-L-81352</cite> - Lacquer, Acrylic (For Naval Weapons Systems)</pre> <br>