درباره ما
NAVY - SH - Naval Sea Systems Command (Ship Systems): Recent submissions
Now showing items 1061-1080 of 2792
-
DOD-STD-2145
Abstract: This standard covers requirements for the arrangement of conductors and devices for disconnect switch boxes and contactor panels used in d.c. circuits that will reduce the stray magnetic field to a minimum.
The ... -
MIL-C-28754/91
Abstract: This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring ... -
MIL-PRF-28800F
Abstract: This specification covers the general requirements for test equipment (see 6.5.2.14) used in testing and calibrating electrical and electronic equipment. The test equipment may be of commercial design and includes ...Subject(s) : Acoustic noise , Automatic test equipment (ATE) , Batteries , Bounce , loose cargo , Built-in test (BIT) , Calibration interval , Commercial-off-the-shelf (COTS) equipment Enclosures , Environmental requirements and tests , Explosive atmosphere requirements and tests , First article , Flammable materials , Frequency-transient test , Interchangeability , Maintainability , Mercury , lithium , or radioactive material , Navy use of Reliability , Shock , Transient-state power , Vibration , -
MIL-STD-108E NOTICE 1
Abstract: This standard establishes definitions and basic requirements for enclosures for environmental protection of electrical and electronic equipment. The use of these definitions for parts intended for mounting in enclosures ... -
MIL-D-23523D
Abstract: This specification contains requirements for an automatic dehydrator for use in low pressure air systems. The dehydrator shall remove particulate matter, aerosols (see 6.5) and water vapor from influent low pressure ...Subject(s) : Desiccant tower , Effluent , Influent , Refrigerated dehydrator , Self-activating , -
MIL-C-22249/6A
Abstract: This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring ... -
MIL-G-3087C
Abstract: This specification covers continuous duty shipboard installed steam turbine generator sets rated up to 1000 kilowatts (kW) direct current(dc) and 300 to 2500 kW alternating current (ac).
The steam turbine generator ... -
MIL-E-19141D
Abstract: This specification covers solid wire covered shielded metal arc welding electrodes for depositing iron-base, abrasion resistant weld-metal overlays. Intended Use: Type MIL-I-A2a and MIL-I-A2c welding electrodes ... -
A-A-59752
Abstract: This commercial item description establishes the performance, design, test, manufacture, and acceptance requirements for non-developmental performed, ready-to-use, flexible, adhesive backed signs, labels, and markings ...Subject(s) : Labels , Marking , Sheeting , retroreflective , Signs , egress , emergency , photoluminescent , reflective , -
A-A-59615
Abstract: This Commercial Item Description covers a cable for communication and telephone service that is flexible and watertight. It consists of four conductors, AWG size 18, and is rated at 600 volts. This cable is intended for ...Subject(s) : 18 AWG , 600 Volts , Cable , Communications , Four Conductor , Shipboard Use , Specialty , Watertight ,