درباره ما
NAVY - SH - Naval Sea Systems Command (Ship Systems): Recent submissions
Now showing items 1081-1100 of 2792
-
MIL-DTL-32286 (2)
Abstract: This specification covers material used for ball valve seat seals and thrust washers (nylon 66 with molybdenum disulfide) in petroleum-based hydraulic fluid systems.Intended Use: This specification covers ...Subject(s) : Polyamide , -
MIL-S-24235C
Abstract: This specification covers metal stuffing tubes for passing electrical cables through decks and bulkheads and entering enclosed equipment on Naval ships and packing assemblies for stuffing tubes.
Metal stuffing tubes ...Subject(s) : Dissimilar metals , Gland nut , Grommet , Kick-pipe , Permeability , Pressureproof bulkhead , -
MIL-V-3E
Abstract: This specification covers the requirements for the packaging (preservation, packing, and marking) of hardware valves such as globe valves, angle valves, check valves, cross valves, cylinder valves, gate valves, relief ...Subject(s) : Hardware valves , Marking , Mechanical valves , Packing , Preservation , -
MIL-P-21929C
Abstract: This specification covers only one class of foam, nominal density - 2.0 pounds per cubic foot (lb/ft3), rigid unicellular polyurethane foam, and the materials required for preparation by the foam-in-place ...Subject(s) : Cured foam , Isocyanate , Unicellular , -
MIL-H-24135/9A
Abstract: This specification covers synthetic rubber hoses, reinforced with four plies heave spiral wrap wire in sizes -8 through -32 for high pressure fluid applications. Intended Use: Hose to this specification is ...Subject(s) : Group VI , Petroleum , Sea water , -
MIL-HDBK-801
Abstract: This handbook covers environmentally hardened pressure gauges. Identity is established by the National Stock Number cross-referenced to the mil-spec classification.
This handbook covers only gauges which are procured ...Subject(s) : Bourdon , Dial , Direct drive , Duplex , Pressure range , Simplex , -
A-A-59729
Abstract: This Commercial Item Description (CID) covers the general requirements for blown optical fiber (BOF) tube furcation units (TFUs) that separate either individual BOF fibers or fiber bundles within a BOF tube into individual ... -
MIL-E-22200/11A
Abstract: This specification covers low-hydrogen, iron-powder type of covered electrodes, for the fabrication and repair welding of HY-130 steel to be heat-treated. Intended Use: This specification is intended to cover ...Subject(s) : Covering moisture , Crack-starter weldment , Diffusible hydrogen , Hold-down area , -
MIL-E-24403/2C
Abstract: This specification covers low-alloy steel flux cored welding electrodes for the fabrication of HY-80 and HY-100 steel weldments for as-welded applications. Intended Use: This specification covers, low-alloy ...Subject(s) : Argon and carbon dioxide shielding gas , Explosion crack-starter , Extensometer , HY-100 steel weldments , HY-80 steel weldments , Radiographic ,