Now showing items 781-800 of 2792

    • MIL-DTL-16034/5A 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2008
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • MIL-PRF-32107/19 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2002
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • MIL-PRF-28876/10F 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2004
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • A-A-59767 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2005
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This commercial item description covers requirements for the MK-1 life preserver, which is use by personnel on U.S. Navy Surface Ships and Submarines performing flight deck and any other shipboard operations (except for ...
      Subject(s) : Buoyancy , Flame-Resistant , Flight Deck Life Vest , Floatation , Self-Righting ,
    • MIL-PRF-24790A 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1998
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification establishes the requirements for braided non-asbestos packing material for rotary, centrifugal, and reciprocating pumps handling various fluids and gases on naval ships. Intended Use: ...
      Subject(s) : Fluid compatibility , Pump , reciprocating rod , Pump , rotating rod ,
    • MIL-T-24649/15 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1994
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification is approved for use by the Naval Sea Systems Command, Department of the Navy and is available for use by all Departments and Agencies of the Department of Defense.
      The requirements for acquiring the ...
    • MIL-DTL-17361G 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2006
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification covers distribution circuit breakers with housings of insulating material for Naval shipboard use.Intended Use: Circuit breakers are to be used in electrical power systems to protect against ...
      Subject(s) : Auxiliary switch , Continuous current , Electric operator , Fuses , Handle locking device , Instantaneous tripping , Interchangeable trip units , Interrupting ratings , Long-time delay , Peak let-through current , Short-time delay , Short-time delay pickup , Shunt trip , Undervoltage trip ,
    • MIL-E-24617A 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1995
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification covers the composition and quality of reagent chemicals used for testing hardness in shipboard boiler feedwater.
      The following specifications, standards, and handbooks form a part of this document ...
      Subject(s) : boron , composition , potassium , sucrose , sulfide , titrating solution ,
    • MIL-DTL-24643/75 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2011
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • MIL-STD-1310H 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2009
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This document specifies standard practices to facilitate achievement of the intra-ship and intership electromagnetic compatibility (EMC), electromagnetic pulse (EMP), bonding, and intermodulation interference (IMI) ...
      Subject(s) : Broadband noise (BBN) , Cable ground system , Intermodulation interference (IMI) , Junction , nonlinear , Penetration , Weatherproofing , Wireway trunks ,
    • MIL-F-24787 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1993
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification covers the requirements for reusable end fittings, elbow (90°) fittings and 180° return fittings for use with flexible rubber hose in low, medium and high pressure shipboard piping systems. ...
      Subject(s) : 120° return , 37° swivel , 90° elbow , Flange , Gasket seal , O-ring union , Split clamp ,
    • MIL-STD-1309D 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1992
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: The purpose of this standard is to standardize the definitions of the most commonly used terms for testing, measurement and diagnostics.
      This standard establishes the definitions most commonly used for test, measurement ...
      Subject(s) : Acronyms , Coordinated terms , Standardization , Test machinery , Troubleshooting ,
    • MIL-H-18160C 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1978
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification covers coupled flexible metal hose of either helical or annular corrugated type construction for steam service up to 200 pounds per square inch (lb/in 2 ) and 425°F. Intended ...
    • MIL-M-28787/542 CANC NOTICE 2 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2013
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • MIL-F-1183/9 VALID NOTICE 1 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1989
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • MIL-STD-2193C 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2012
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This standard provides design, construction, and testing requirements that are common to most components used in ship hydraulic (power transmission and control) systems. This standard does not establish configuration ...
    • MIL-DTL-16034/10A 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2008
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • MIL-PRF-32097A 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2005
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification identifies the performance requirements for a filtration module utilizing a ceramic membrane, which is intended for use in an oily waste membrane system utilizing filtration modules. Intended ...
      Subject(s) : Bilge water , Filtration device , Membrane , Oil/water separator , Open system architecture , OSA , OWS , Recirculation system , Ultrafiltration ,
    • MIL-V-17848C 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1979
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification covers self-contained pressure-reducing valves for steam service. Intended Use: Pressure-reducing valves covered by this specification are intended for line steam pressure reducing service ...
    • MIL-T-24649/3 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1994
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification is approved for use by the Naval Sea Systems Command, Department of the Navy and is available for use by all Departments and Agencies of the Department of Defense.
      The requirements for acquiring the ...