ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate: Recent submissions

Now showing items 81-100 of 179

    • MIL-W-12332A 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1964
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers the spot, seam, and projection, resistance welding of low-carbon steel fabricated assemblies (see 4.1 and 8.1).
      The materials to be welded under this specification include light ...

    • QQ-A-1876 VALID NOTICE 1 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1990
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • MIL-HDBK-731 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1984
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This is the first volume of a nine volume series on nondestructive testing of composite materials. Each volume is designed to provide an overview of the general method. This volume contains an overview of techniques available ...

    • MIL-PRF-46187A 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1998
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification establishes the requirements for carbon fiber/high temperature resin prepreg in the form of unidirectional tape suitable for the fabrication of structural laminates intended for use at temperatures up ...
      Subject(s) : Laminates , Polyimide , Thermoplastic , Thermoset ,

    • MIL-HDBK-698A VALID NOTICE 1 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1990
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • QQ-A-1876 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1974
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers uncoated aluminum foil.Intended Use: Grade A foil 0.0007 to 0.002 inch is suitable for the wrapping of foods during cooking processes. The thickness of the foil to be used will be ...

    • MIL-HDBK-212 VALID NOTICE 1 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1988
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • MIL-DTL-13080E 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1999
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers austenitic steel arc welding electrodes for use on steels of high hardenability (see 6.1). Intended Use: This specification is military unique because it covers austenitic ...
      Subject(s) : Concentricity , Core wire , Dielectric strength , Fillet , Slag ,

    • MIL-DTL-46100E (1) NOTICE 1 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2009
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers quenched and tempered high-hardness wrought steel armor plate for lightweight armor applications for ordered thicknesses from 0.118 inches (3 mm) up to an ordered thickness of 2.000 inches (50.8 ...
      Subject(s) : Heat treated plates ,

    • MIL-DTL-32412 NOTICE 1 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2012
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • MIL-HDBK-730 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1986
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: PREFACE
      The purpose of this handbook is to provide Department of Defense engineering and quality assurance personnel with the basic principles and general knowledge of materials joining processes.
      This handbook is ...

    • MIL-T-13915E 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1987
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers seamless, thin-wall, steel tubes in the quenched and tempered condition for use in the manufacture of cannons and recoilless rifles.
      Subject(s) : Thin-wall tubes , for cannons and recoilless rifles , Tubes , steel , seamless ,

    • MIL-HDBK-697A VALID NOTICE 1 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1990
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • MIL-HDBK-149B NOTICE 2 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2013
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • MIL-DTL-32459 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2013
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers the general requirements for the application and inspection of applying an anodic, hexavalent chromium-free and HAP (Hazardous Air Pollutants) free coating to magnesium alloys parts, newly developed ...

    • MIL-HDBK-692B NOTICE 1 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2013
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • MIL-HDBK-790 CHG NOTICE 2 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1993
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: Intended Use: This handbook contains requirements for characterizing fracture origins in advanced structural ceramics. It is limited to monolithic ceramics and some composite ceramics.
      Subject(s) : Agglomerate , Crack , Flaw , Fractography , Inclusion , Machining damage , Microscope , Pit , Pore , Void ,

    • MMM-A-189C 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1985
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers organic-solvent-base synthetic rubber thermoplastic adhesives for general-purpose use (see 6.1). Intended Use: While the adhesive classes in this specification are intended ...

    • MIL-DTL-46192C 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1998
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers aluminum alloy 2519 armor rolled plate from 1/2 inch up to and including 4 inches in thickness.
      The material covered by this specification is weldable to itself and other weldable 2000 series ...
      Subject(s) : Aluminum alloy 2519 , Armor plate ,

    • MIL-DTL-12276E 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2006
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers three types of heat hardening phenolic varnishes suitable for use as a coating for cartridge cases and as a lining for munitions and other containers. This document also provides for an additional ...
      Subject(s) : Aromatic compounds , Bisphenol epoxide , Cartridge cases , Chemical containers , Coatings , Dip applications , Munitions , Phenolic varnishes , Plasticizers , Rosin , Spray applications , Thermosetting , Varnish ,