MIL-I-15265C
INSULATION, ELECTRICAL, PLASTIC (SUBMARINE BUS BAR COVERING)
Organization:
NAVY - SH - Naval Sea Systems Command (Ship Systems)
Year: 1992
Abstract: This specification covers plastic, electrical insulating materials used primarily for covering submarine bus bars and battery intercell connections. Other applications may be considered where a tough plastic covering is needed over metal surfaces.
Plastic electrical insulation shall be of the following types, as specified (see 6.2):
Intended Use: This insulation is intended for covering bus bars, primarily on submarines, where a flame resistant, tough, non-porous, good dielectric covering is needed. The type P material provides a build of approximately 0.060 to 0.070 inches. This insulation shall not be used in applications where the continuous operating hot spot temperature exceeds 221 °F (105 °C) Instructions for applying these materials to submarine battery bus bars and connectors is contained in the appendix to this specification.
Plastic electrical insulation shall be of the following types, as specified (see 6.2):
Type Description P Resin - plasticizer dispersion (plastisol)
Intended Use: This insulation is intended for covering bus bars, primarily on submarines, where a flame resistant, tough, non-porous, good dielectric covering is needed. The type P material provides a build of approximately 0.060 to 0.070 inches. This insulation shall not be used in applications where the continuous operating hot spot temperature exceeds 221 °F (105 °C) Instructions for applying these materials to submarine battery bus bars and connectors is contained in the appendix to this specification.
Subject: Abrasion resistance
Collections
:
Show full item record
contributor author | NAVY - SH - Naval Sea Systems Command (Ship Systems) | |
date accessioned | 2017-09-04T16:17:06Z | |
date available | 2017-09-04T16:17:06Z | |
date copyright | 06/11/1992 | |
date issued | 1992 | |
identifier other | TBSWDAAAAAAAAAAA.pdf | |
identifier uri | http://yse.yabesh.ir/std/handle/yse/80436 | |
description abstract | This specification covers plastic, electrical insulating materials used primarily for covering submarine bus bars and battery intercell connections. Other applications may be considered where a tough plastic covering is needed over metal surfaces. Plastic electrical insulation shall be of the following types, as specified (see 6.2): Type Description P Resin - plasticizer dispersion (plastisol) Intended Use: This insulation is intended for covering bus bars, primarily on submarines, where a flame resistant, tough, non-porous, good dielectric covering is needed. The type P material provides a build of approximately 0.060 to 0.070 inches. This insulation shall not be used in applications where the continuous operating hot spot temperature exceeds 221 °F (105 °C) Instructions for applying these materials to submarine battery bus bars and connectors is contained in the appendix to this specification. | |
language | English | |
title | MIL-I-15265C | num |
title | INSULATION, ELECTRICAL, PLASTIC (SUBMARINE BUS BAR COVERING) | en |
type | standard | |
page | 17 | |
status | Active | |
tree | NAVY - SH - Naval Sea Systems Command (Ship Systems):;1992 | |
contenttype | fulltext | |
subject keywords | Abrasion resistance | |
subject keywords | Acid resistance | |
subject keywords | Flame resistance | |
subject keywords | Gravity | |
subject keywords | Nonvolatiles |