Now showing items 1-20 of 344

      • NACE 6G194 

        Type: standard
        Source: NACE - NACE International:;1994
        Organization : NACE - NACE International
        Abstract: GENERAL
        This state-of-the-art report addresses the use of thermal precleaning for tanks, vessels, rail tank cars and hopper cars, and process equipment when preparing surfaces for the application of ...
      • NACE 5A195 

        Type: standard
        Source: NACE - NACE International:;1995
        Organization : NACE - NACE International
      • NACE 14C296 

        Type: standard
        Source: NACE - NACE International:;1996
        Organization : NACE - NACE International
        Abstract: Introduction
        Corrosion of stainless steel, carbon steel, and aluminum takes place to varying degrees under thermal insulation in the presence of moisture. Water and/or steam may enter the insulation ...
      • NACE 6G197 

        Type: standard
        Source: NACE - NACE International:;1997
        Organization : NACE - NACE International
        Abstract: Foreword
        his state-of-the-art report covers the design, installation, and maintenance of polymeric coating systems that are applied and directly bonded to concrete in secondary containment applications. ...
      • NACE 6G198 

        Type: standard
        Source: NACE - NACE International:;1998
        Organization : NACE - NACE International
        Abstract: This document covers procedures, equipment, and materials involved in a variety of air/water/abrasive, water/abrasive, and water-pressurized abrasive blast cleaning systems. Equipment usage and safety are also discussed.
      • NACE 1D199 

        Type: standard
        Source: NACE - NACE International:;1999
        Organization : NACE - NACE International
        Abstract: General
        Corrosion monitoring techniques can be divided into intrusive and nonintrusive methods. Intrusive methods are those that access the inside of a system. Nonintrusive systems do not require ...
      • NACE SP0395 

        Type: standard
        Source: NACE - NACE International:;1999
        Organization : NACE - NACE International
        Abstract: General
        This standard defines the requirements for fusion-bonded epoxy (FBE) powder coatings applied by electrostatic spray or other suitable method to deformed and plain steel reinforcing bars that ...
      • NACE RP0395 

        Type: standard
        Source: NACE - NACE International:;1999
        Organization : NACE - NACE International
        Abstract: This standard defines the requirements for fusionbonded epoxy powder coatings applied by electrostatic spray or other suitable method to deformed and plain steel reinforcing bars that are intended to be capable of ...
        Subject(s) : Coating requirements , concrete reinforcement , corrosion resistance , epoxy coating , fabrication repair , field repair , steel bars ,
      • NACE 11100 

        Type: standard
        Source: NACE - NACE International:;2000
        Organization : NACE - NACE International
        Abstract: Introduction
        In the recent past the costs of damage due to corrosion of reinforced concrete have risen dramatically. Concrete structures such as bridges, parking garages, buildings, and marine docks ...
      • NACE 6A100 

        Type: standard
        Source: NACE - NACE International:;2000
        Organization : NACE - NACE International
        Abstract: Introduction
        The decision to use protective coatings, cathodic protection, or both is often based on economic, safety, and environmental issues as well as the particular conditions of the structure ...
      • NACE 80200 

        Type: standard
        Source: NACE - NACE International:;2000
        Organization : NACE - NACE International
        Abstract: The purpose of this NACE/SSPC technical committee report is to describe current practices for the preparation of a protective coating specification for atmospheric service. It provides a general description of a specification, ...
      • NACE 1F192 

        Type: standard
        Source: NACE - NACE International:;2000
        Organization : NACE - NACE International
        Abstract: Introduction
        Definition of CRA — A corrosion-resistant alloy (CRA) is defined as an alloy whose mass-loss corrosion rate in produced fluids is at least an order of magnitude ...
      • NACE TM0193 

        Type: standard
        Source: NACE - NACE International:;2000
        Organization : NACE - NACE International
        Abstract: This standard describes a simple method for measuring the relative corrosiveness of solutions used for chemical cleaning in a static system at temperatures below 93° (200°). The tests described are conducted ...
      • NACE 6A192 

        Type: standard
        Source: NACE - NACE International:;2000
        Organization : NACE - NACE International
        Abstract: The use of dehumidification and temperature control during surface preparation and coatingilining application can be beneficial in a variety of ambient conditions. When used properly, dehumidification (DH) provides air dew ...
      • NACE 01101 

        Type: standard
        Source: NACE - NACE International:;2001
        Organization : NACE - NACE International
        Abstract: Introduction
        Reinforced concrete is a versatile and widely used construction material. Its excellent performance and durability rely on the compatibility of the steel with the concrete surrounding it ...
      • NACE 05101 

        Type: standard
        Source: NACE - NACE International:;2001
        Organization : NACE - NACE International
        Abstract: Introduction
        Field investigations by Romanoff and other researchers at the National Institute of Standards and Technology (NIST)(formerly the National Bureau of Standards [NBS])(1) in the ...
      • NACE RP0391 

        Type: standard
        Source: NACE - NACE International:;2001
        Organization : NACE - NACE International
        Abstract: This standard provides information about the design and selection of materials used in the handling and storage of commercial concentrated sulfuric acid at ambient temperatures. The term ambient is intended to include ...
      • NACE 34101 

        Type: standard
        Source: NACE - NACE International:;2001
        Organization : NACE - NACE International
        Abstract: Introduction
        Many different types of process additives are used to maintain reliability and optimal performance of refinery operations. An additive can be a proprietary chemical such as a corrosion ...
      • NACE RP0193 

        Type: standard
        Source: NACE - NACE International:;2001
        Organization : NACE - NACE International
        Abstract: It is extremely important to maintain the integrity of on-grade carbon steel storage tanks for both economic and environmental reasons. The proper design, installation, and maintenance of cathodic protection (CP) systems ...
      • NACE 35101 

        Type: standard
        Source: NACE - NACE International:;2001
        Organization : NACE - NACE International
        Abstract: General
        Liner Description
        The thermoplastic liner system described in this report combines layers of materials that allow the total structure to behave homogeneously, but with a ...