JSA - Japanese Standards Association: Recent submissions

Now showing items 121-140 of 2957

    • JSA JIS G 3506 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies high carbon steel wire rods (hereafter referred to as wire rods) to be used for the manufacture of the hard drawn steel wires, oil tempered steel wires, hard drawn steel wires for prestressed ...

    • JSA JIS C 4620 

      Type: standard
      Source: JSA - Japanese Standards Association:;2018
      Organization : JSA - Japanese Standards Association
      Abstract: This Japanese Industrial Standard specifies the cubicle type high voltage power receiving units (hereafter referred to as cubicles) not exceeding 4000 kVA in the capacity of power receiving unit, intended for use by a ...

    • JSA JIS C 1302 

      Type: standard
      Source: JSA - Japanese Standards Association:;2018
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies portable insulation resistance testers of built-in battery type, having a rated output voltage not exceeding 1000 V, which are used for the measurements of the following a) to e). a) Insulation ...

    • JSA JIS Z 3129 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies the preparation of test specimens taken from butt welded test pieces for one-run and two-run technique in steel using submerged arc welding consumables, and flux cored wires for gas sealed arc weld ...

    • JSA JIS S 1102 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Japanese Industrial Standard specifies the beds for domestic use 1) (hereafter referred to as beds). This Standard does not cover beds with special functions or structures, such as cribs, sofa beds, bunk beds, adjustable ...

    • JSA JIS A 5011-4 

      Type: standard
      Source: JSA - Japanese Standards Association:;2018
      Organization : JSA - Japanese Standards Association
      Abstract: There is no abstract information for this document.

    • JSA JIS K 1101 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Japanese Industrial Standard specifies (liquefied or compressed) oxygen for industrial use fed into a high pressure gas vessel (hereafter referred to as oxygen). WARNING 1 Liquefied oxygen has extremely low temperature ...

    • JSA JIS Z 3282 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies lead-containing soft solders used in the field of general or electric/electronic industries (hereafter referred to as lead-containing solders) and soft solders not containing lead (hereafter referred ...

    • JSA JIS B 1582 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies the bushes to be used as the plain bearings in general machinery (hereafter referred to as bushes). As to the flanged bushes, see Annex A which corresponds to ISO 4379. NOTE: The International ...

    • JSA JIS G 3303 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies the tinplates and blackplates that are intended mainly for beverage can or food can. NOTE: The International Standards corresponding to this Standard and the symbol of degree of correspondence are ...

    • JSA JIS B 7512 

      Type: standard
      Source: JSA - Japanese Standards Association:;2018
      Organization : JSA - Japanese Standards Association
      Abstract: This Japanese Industrial Standard specifies requirements for the steel tape measures of 0.5 m to 200 m in nominal length (hereafter referred to as tape measures).

    • JSA JIS B 7730 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies a method for calibration of reference blocks of scales A to H, K, N, and T, to be used for the indirect verification and daily checks and maintenance of Rockwell hardness testing machines specified ...

    • JSA JIS B 2316 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: The Standard specifies the steel seamless pipe fittings, to be fitted by socket welding, mainly to pressure service pipings 1) high pressure service pipings 2) jigh temperature service pipings 3) alloy steel pipings 4), ...

    • JSA JIS Z 1600 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies the characteristics and dimensions of removable head (open head) drums, manufactured from steel sheet, having a total capacity of 208 L, 210 Land 216.5 L (hereafter referred to as drums). NOTE: The ...

    • JSA JIS B 1188 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies the steel and brass cross recessed head screws with captive washer for general purposes. The cross recessed head screws specified in this Standard are screws manufactured by mounting a washer onto ...

    • JSA JIS S 2147 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies the portable cookers (hereafter referred to as the appliance) used with a cylinder filled with liquefied petroleum gas (hereafter referred to as gas) which is built into the appliance either as one ...

    • JSA JIS C 4602 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies requirements for overcurrent relays (hereafter referred to asrelays) which are installed at power receiving points of 6.6 kV consumers for the purpose of protecting the electrical circuits against ...

    • JSA JIS G 1323-7 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Japanese Industrial Standard specifies the method for determination of aluminium, silicon, phosphorus, vanadium, manganese, iron and nickel in chromium metal using ICP atomic emission spectrometric method. This method ...

    • JSA JIS G 1211-3 AMD 2 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: There is no abstract information for this document.

    • JSA JIS C 3662-7 AMD 1 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: There is no abstract information for this document.