درباره ما
TIA - Telecommunications Industry Association: Recent submissions
Now showing items 261-280 of 1186
-
TIA TIA-756-A
Abstract: This document specifies the ANSI/TIA/EIA-41-D network impacts of Number Portability (NP), specifically service provider portability, as mandated by the FCC in Docket No. 95-1 16. Service provider ... -
TIA TIA-707.10-B
Abstract: General Description
This document specifies procedures for Radio Link Protocol Type 3. Radio Link Protocol Type 3 is used with a cdma2000®1 Traffic Channel to support CDMA data services. ... -
TIA IS-89
Abstract: These standards detail definitions, methods of measurement, and minimum performance Characteristics of 800 MHz cellular land stations. These standards share the purpose of the Mobile Station - Land Station Compatibility ... -
TIA TIA-41.790-E
Abstract: This Annex describes the following call delivery scenarios:
a. normal MS - MS call delivery, with both MSs served by the same MSC (see Figure 4 )
b. normal MS - MS call delivery, with MSs served by different Serving ... -
TIA TIA-455-106
Abstract: This test covers the wavelength range from 600 nanometers to 1700 nanometers using a spectrophotometer capable of generating visible and near-infrared light. This method covers primary, secondary, and single coatings (e.g., ... -
TIA TIA-455-104-A
Abstract: This procedure is designed to measure permanent and/or transient optical transmittance changes and requires the assessment of any damage occurring to other cable components.
Failure Modes- Potential failure modes for ... -
TIA TIA-102.AAAD-A
Abstract: The Project 26 standard covets all of the pans of a system (or pubilc-satety Land Mobile Radio communications. These systems include portable radios for hand held operation, mobile radios for vehicular operation, base ... -
TIA TIA-902.BBAB
Abstract: The scope of this document is to define the physical layer, or layer 1, of the IOTA/OFDM Modulation (IOTA) wideband air interface. The wideband air interface called Uw is the interface between the fixed network equipment ... -
TIA TIA-102.CAEB
Abstract: INTRODUCTION
This document defines a P25 Conformance Profile (PCP) for advanced conventional operation, which is further subdivided into functional groupings and items. Each PCP item devolves to a set ... -
TIA J-STD-100
Abstract: This specification is a joint specification between the Alliance for Telecommunications Industry Solutions (ATIS) and the Telecommunications Industry Association (TIA).
One of the objectives of the Commercial Mobile ... -
TIA TIA-470.310-D
Abstract: This standard establishes procedures and criteria for evaluating Cordless Telephone Range Performance in a traditional outdoor environment as well as a controlled laboratory environment.
The intent is not to establish ... -
TIA TIA-41.328-E-1
Abstract: INTRODUCTION
Unless otherwise noted, the scenarios in this section depict features operating individually; i.e., feature interactions are not considered unless specifically noted.
The scenarios in ... -
TIA TIA/EIA/IS-790
Abstract: The scope of this standard is to define a latching system which will allow the consumer the ability to mount and remove consumer electronics products into the vehicle in an entirely convenient fashion. -
TIA TIA/EIA-455-69A
Abstract: INTRODUCTION
This test is intended to determine the ability of an optical fiber to maintain optical performance (attenuation and temperature dependence of attenuation) over an extended period of time ... -
TIA TSB115
Abstract: lnfroducfion
This is an informative document that describes the packet data system architecfotur rae third generation wireless system based on IMT-2000. The general capabilitiesf or this system ... -
TIA TIA-492E000
Abstract: This Specification applies to Class IVd nonzero dispersion single-mode optical fibers with glass core and cladding.
Class IVd fibers are typically used in telecommunications, video, and data applications. Their chromatic ... -
TIA TIA-920.000-A
Abstract: OVERVIEW FOR TIA-920-A STANDARDS
The TIA-920-A sub-documents are the result of the revision process for the TIA-920 document. Due to the size of the TIA-920 document it was deemed necessary ... -
TIA TIA-455-162-A
Abstract: This test procedure applies to the testing of optical fiber cable. Related tests for connectors and other devices which may be connected to cables under test are discussed in 1.5. -
TIA TIA-455-188
Abstract: Intent
This procedure is intended for exposing a specimen to the environmental condition of extended low temperature (cold). It is not intended for exposing a specimen to the environmental condition ...