درباره ما
API - American Petroleum Institute: Recent submissions
Now showing items 681-700 of 1822
-
API RP 11S4
Abstract: Each component of the ESP system (pump, motor, intake, seal or protector, cable, switchboard, etc.) is discussed in some detail as far as what must be considered for the best selection at a desired rate and well conditions. ... -
API PUBL 2524
Abstract: The marine transfer emission factors documented in the American Petroleum Institute (API) publication entitled "Atmospheric Hydrocarbon Emissions from Marine Vessel Transfer Operations, API 2514A" (API, 1987) has been ... -
API BULL D16
Abstract: Purpose of SPCC Rule
The regulation is divided into three subparts, which detail the requirements for a Spill Prevention, Control, and Countermeasure (SPCC) Plan. Subpart A (§ 112.1 to §112.7) contains ... -
API RP 2030
Abstract: General
When addressing loss prevention, an organization should consider the use of fixed fire protection systems, one of which is water spray systems. Water spray systems appear similar to ... -
API RP 14C
Abstract: This document presents recommendations for designing, installing, and testing a basic surface safety system on an offshore production platform. The basic concepts of a platform safety system are discussed and protection ... -
API MPMS 8.4
Abstract: This practice covers procedures and equipment for obtaining, mixing, and handling representative samples of volatile fuels for the purpose of testing for compliance with the standards set forth for volatility related ... -
API TR 17TR5
Abstract: This document addresses the avoidance of blockages in subsea production control and chemical injection systems (CISs). It includes requirements and gives recommendations for the design and operation of subsea production ... -
API BULL 2V ERTA
Abstract: Bulletin 2V provides guidance for the design of steel flat plate structures. These often constitute main components of offshore structures. When applied to Tension Leg Platforms (TLPs) this Bulletin should be viewed ... -
API RP 752
Abstract: General
This recommended practice (RP) provides guidance for managing the risk from explosions, fires and toxic material releases to on-site personnel located in new and existing buildings intended for ... -
API MPMS 3.1A
Abstract: This standard describes the following:
a) the procedures for manually gauging the liquid level of petroleum and petroleum products in nonpressure fixedroof, floating-roof tanks and marine tank vessels;
b) procedures ... -
API STD 599
Abstract: This standard covers design, materials, face-to-face dimensions, pressure-temperature ratings, and examination, inspection, and test requirements for metallic plug valves as follows.
— Steel, nickel base, and ... -
API PUBL 4688
Abstract: Purpose of the Document
This document provides guidance to terminal operators and engineers in evaluating and selecting mobile treatment systems for wastewater generated at petroleum distribution terminals. ... -
API VOCATIONAL BOOK 1
Abstract: Progress in solving the secrets of the origin and accumu- lation of petroleum took a giant step forward in 1859 with the drilling of the first oil well. This initial well was drilled to a depth of 69 feet. Oil and gas ... -
API STD 20D
Abstract: Purpose
This standard specifies requirements for the design, development, and qualification of nondestructive examination (NDE) methods used in the manufacturer of equipment for the petroleum and natural ... -
API PUBL 3805
Abstract: Exchange oil and gas check stub information in a standardized check detail format. -
API TR 10TR5
Abstract: Introduction
Solid and rigid centralizers have been used by the petroleum industry for many years to assist with running casing to the bottom of the wellbore and with improving mud displacement. The purpose of this ... -
API RP 5C6
Abstract: PURPOSE
This recommended practice was created to provide a standard industry practice for the shop or field welding of connectors to pipe.
The technical content provides requirements for welding ... -
API MPMS 4.5
Abstract: This standard covers the use of displacement, turbine, Coriolis, and ultrasonic meters as master meters.
The requirements in this standard are intended for single-phase liquid hydrocarbons. Meter proving requirements ... -
API RP 7L
Abstract: OBJECTIVE
The objective of this publication is to provide owners and users of equipment listed below guidelines for inspection, maintenance, repair, and remanufacture procedures that may be utilized ... -
API RP 13J
Abstract: This part of ISO 13503 covers the physical properties, potential contaminants and test procedures for heavy brine fluids manufactured for use in oil and gas well drilling, completion and workover fluids.
This part of ...