درباره ما
AASHTO - American Association of State Highway and Transportation Officials: Recent submissions
Now showing items 761-780 of 2524
-
AASHTO HDG
Abstract: INTRODUCTION
The planning and locating of highway facilities are the first steps in a challenging process of providing a safe and efficient transportation system. Hydrologic and hydraulic requirements ... -
AASHTO PP1
Abstract: This practice covers the accelerated aging (oxidation) of asphalt binders by means of pressurized air and elevated temperature. The test method is intended to simulate in-service oxidative aging of asphalt binders and is ... -
AASHTO HB-17 DIVISION II SEC 4
Abstract: DESCRIPTION
This work shall consist of furnishing and driving foundation piles of the type and dimensions designated on the plans or in the special provisions including cutting off or building up ... -
AASHTO T 328
Abstract: This practice outlines methods for the reduction of large samples of hot-mix asphalt (HMA) to the appropriate size for testing, employing techniques that are intended to minimize variations in the measured characteristics ... -
AASHTO T 336
Abstract: This test method covers determination of the coefficient of thermal expansion (CTE) of hydraulic cement concrete cores and cylinders. Because it is known that the degree of saturation of concrete influences its measured ... -
AASHTO PP3
Abstract: This standard describes the mixing and compaction procedures to produce large slab specimens (approximately 102 mm thick by 762 mm wide by 762 mm long) of modified or unmodified hot mix asphalt (HMA) in the laboratory by ...