درباره ما
NAVY - AS - Naval Air Systems Command: Recent submissions
Now showing items 861-880 of 2147
-
MIL-R-7885D
Abstract: This specification covers mechanically locked spindle and friction locked spindle blind rivets which can be installed where access to one side of the joint is not accessible for installation of solid fasteners. Intended ...Subject(s) : Blind , Friction , locked , Locking , feature , Mechanically , locked , Rivet , Spindle , Structural , -
MIL-PRF-18494F VALID NOTICE 1
Abstract: This specification covers the requirements for inflatable life rafts of 8-man, 12-man, and 20-man capacity. Intended Use: The rafts are intended for use as emergency equipment by military aircrews forced down ... -
MIL-L-23822C
Abstract: This specification establishes the requirements for the performance, manufacture, testing, acceptance and packaging of the Liquid Propellant Rocket Engine LR64. Intended Use: The Liquid Propellant Rocket ... -
MIL-A-25896E
Abstract: This specification covers pressure fuel servicing adapters having a nominal line size of 2.5-inch diameter. Intended Use: The adapters specified herein are intended for use as fuel system filling/off-loading ... -
MIL-T-81831
Abstract: The equipment covered by this specification shall be for shop use and shall provide signals and measuring devices necessary for the maintenance of the AN/APN-141 (V) Electronic Altimeter Set.
The test equipment covered ... -
MIL-I-8835A
Abstract: This specification establishes the requirements for one type of chemically impregnated, humidity sensitive, indicator card designed for use in the preservation and packaging of items in accordance with Method II of MIL-P-116 ... -
A-A-59290
Abstract: This commercial item description (CID) covers a commercially available ethylene glycol that has been modified with corrosion inhibitors. The modified glycol is generally used in aircraft arresting gear systems as a hydraulic ... -
PPP-C-1797A
Abstract: This specification covers a low density, resilient, unicellular (closed cell) polypropylene foam material for use in cushioning and packing applications. It is useful throughout a temperature range from -65°F (-54°C) ... -
MIL-PRF-21480B
Abstract: This specification establishes the general requirements for three phase, four wire, wye-connected, 400 Hertz, alternating current (AC), constant input speed, electric power generator systems for use on aircraft.Intended ...Subject(s) : Internal power control , Power source , Slash rating , Voltage , -
MIL-HDBK-258
Abstract: This handbook establishes the physical and functional interface for aircraft installation of the AN/AAS-36 infrared detecting set (IRDS). The physical and electrical Interfaces are defined for the IRDS supplier, the ... -
MIL-H-85800/4
Abstract: This specification is approved for use within the Naval Air Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The complete requirements for ... -
MIL-R-29565A
Abstract: This specification establishes the minimum requirements for the manufacture, test, and acceptance of the Mk 125 Mod 1 Rocket Motor. Intended Use: The rocket motor is used to provide auxilliary thrust to the ...Subject(s) : Ballistic test , JATO , Propellant grain , RATO , Static firing , Thrust angle , -
MIL-I-22110C
Abstract: This specification gives the requirements for volatile corrosion inhibitors (VCI) in crystalline powder form. The corrosion inhibiting vapors from the crystals shall provide corrosion protection for most metals under ... -
MIL-C-29600/21
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The complete requirements for acquiring the connectors described herein shall consist of this specification and the ...