درباره ما
ECIA - Electronic Components Industry Association: Recent submissions
Now showing items 101-120 of 507
-
ECA EIA/ECA-955
Abstract: Description
This document details the qualification requirements for surface mount aluminum chip capacitors with polymer cathode. The qualification program is defined in Table 1. Specification sheets ... -
ECA EIA-364-35C
Abstract: This standard establishes a method to determine the ability of an insert to withstand axial forces in electrical connectors.
Object
The object of this test is to detail a standard method to determine the adequacy ... -
ECA EIA/ECA-963
Abstract: Introduction
This specification defines the requirements for a family of thin film chip resistor arrays on ceramic substrate with various configurations and package sizes. -
ECA 521
Abstract: INTRODUCTION
Ceramic capacitors are those wherein the dielectric material -is a high-temperature, sintered, inorganic compound. As a general rule, these materials are based on mixtures of complex ... -
ECA 395
Abstract: This standard covers polarized aluminum electrolytic capacitors intended for long life application (Type 1) and general purpose application (Type 2), both for use in low frequency filter and by-pass circuits where the ... -
ECA 376
Abstract: This EIA Standard covers the general requirements for direct current (D.C.) film dielectric, fixed capacitors in metallic and non-metallic cases. Capacitors listed are used primarily in entertainment, commercial and ... -
ECA EIA-540B0AA-A
Abstract: This specification covers interconnect systems typically used for production ball grid array (BGA) devices with pin counts of 1089 and greater.
Purpose
The purpose of this detail specification is ... -
ECA EIA-448-2A
Abstract: PURPOSE
The purpose of this standard is to evaluate electromechanical components which have been subjected to the environmental effects of machine soldering and the associated fluxing, preheating and cleaning ... -
ECA TEP131-A
Abstract: This publication provides the criteria for television picture bulbs and implosion panels. The individual items specified herein are, for the most part, those which are of some commercial interest within the United States ... -
ECA 512
Abstract: Methods are described which permit determination of fhe values of the equivalent electrical parameters of piezoelectric quartz crystal units, utilizing automated measuring equipment. The methods described make use of ... -
ECA 580A000
Abstract: This standard applies to fixed chip capacitors for direct current, with metallized electrodes and polyethylene-terephthalate dielectric for use in electronic equipment. These capacitors have metallized connecting pads or ... -
ECA EIA-700BAAD
Abstract: This standard applies to rectangular cable to board connectors having the following characteristics:
• shielded;
• 8 position;
• rectangular-shaped mating interface; ... -
ECA TEP105-8
Abstract: The purpose of this test is to measure the resolution capability of a cathode ray display tube.
Raster scan is the most widely used method of displaying information on a CRT. The test described in this section gives a ... -
ECA 186-3E
Abstract: PURPOSE
This test is intended to evaluate the effect of absorption and diffusion of moisture and moisture vapor on component parts. The test is an artificial environmental test and is severely accelerated ... -
ECA CB8
Abstract: PURPOSE OF THE BULLETIN
The purpose of this Bulletin is to provide general and summarized information to engineering and marketing personnel of the U.C: electronics industry concerning Agencies, both in the U.S. and ... -
ECA TEP110-A
Abstract: The usual applicability of the five. General Quality Criteria is as established below:
Criteria No. 1 - Monochrome (Black & White), entertainment, direct-view television picture tube bulbs.
Criteria No. ...