AWS - American Welding Society: Recent submissions
Now showing items 161-180 of 451
-
AWS WHC1.12
Abstract: INTRODUCTION
The success of a business is usually measured by its profitability, based on the ability of the company to hold costs to the limits defined by competitive selling prices. The costs associated ... -
AWS PRGVT
Abstract: This publication is designed to provide information in regard to the subject matter covered. It is made available with the understanding that the publisher is not engaged in the rendering of professional advice. Reliance ... -
AWS A5.22/A5.22M
Abstract: This specification prescribes requirements for the classification of flux cored stainless steel electrodes for flux cored arc welding, flux cored stainless steel rods for root pass welding with the gas tungsten arc process, ... -
AWS B1.10M/B1.10
Abstract: This standard provides a reference guide for the kinds of nondestructive examination methods that are used to verify that welds meet the requirements of a code or specification. The nondestructive examination methods ... -
AWS QC4
Abstract: Requirements.
This Standard establishes minimum requirements for Test Facilities, their personnel, and equipment to qualify for accreditation to test and qualify welders in the AWS Certified Welder ...Subject(s) : Accreditation , Laboratory Certification , Test Facility , -
AWS D1.9/D1.9M
Abstract: The code contains the requirements for fabricating titanium structures. When the code is stipulated in contract documents, conformance with all provisions of the code shall be required, except for those provisions that the ... -
AWS B2.1-1-232
Abstract: The data to support this Standard Welding Procedure Specification (SWPS) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding ... -
AWS D17.3/D17.3M
Abstract: This specification contains the requirements for designing, friction stir welding, and inspecting aluminum aerospace hardware. Friction stir welding (FSW) produces a weld between two abutting workpieces by the friction ... -
AWS G1.1M/G1.1
Abstract: This guide details the ultrasonic equipment and the processes for welding thermoplastic parts. It also describes staking, swaging, insertion, forming, degating, cutting, and trimming. Included are discussions on joint and ... -
AWS CMWS
Abstract: Preface
In 2000, the American Welding Society (AWS) initiated the establishment of a Certification Program for Welding Supervisors. First, an AWS committee drafted the B5.9:2000, Specification for ... -
AWS C4.4/C4.4M
Abstract: This publication describes some causes of distortion and corrective actions through the use of heat. It also describes some heat shaping techniques and the direction of movement expected in the heated metal. Equations are ... -
AWS D3.6M
Abstract: This Code covers underwater welding in both dry and wet environments. All provisions of this document apply equally to new construction and to modification and repair of existing structures underwater. -
AWS A10.1M
Abstract: This specification sets forth accepted methods for testing and reporting the performance characteristics of Rogowski-type air core Current Sensing Coils (CSCs) and the Weld Current Monitors (WCMs) used in the measurement ... -
AWS B2.1-5A-226
Abstract: The data to support this Standard Welding Procedure Specification (SWPS) were derived from the above-listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding Research ... -
AWS B2.1-1-001
Abstract: This standard contains the essential welding variables for carbon steel plate and pipe in the thickness range of 3/16 through 3/4 in., using manual shielded metal arc welding. It cites the base metals and operating conditions ...