درباره ما
ASTM - ASTM International: Recent submissions
Now showing items 1641-1660 of 39933
-
Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics
Abstract: This specification establishes the requirements for several grades and types of electrodeposited copper plus nickel plus chromium coatings on plateable plastic substrates where appearance, durability and resistance to ... -
Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
Abstract: 5.1 This test evaluates the flexibility of artificially weathered latex sealants in a low-temperature environment. -
Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
Abstract: 5.1 These test methods determine whether copper products will be resistant to embrittlement when exposed to elevated temperatures in a reducing atmosphere. 5.1.1 It is assumed that all who use these test methods will be ... -
Standard Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements
Abstract: This specification covers annealed, drawn or rolled iron-chromium-aluminum alloy shapes used for electrical heating and resistance purposes. This specification contains the requirements for chemical composition, electrical ... -
Standard Specification for Heat and Corrosion Resistant High Temperature Alloy Bar or Rod
Abstract: This specification covers alloys UNS N06002, UNS N06230, UNS N12160, and UNS R30556 in the form of rod for heat resisting and general-corrosive service. The material shall conform to the required chemical composition for ... -
Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys Bar or Rod
Abstract: This specification covers rods of nickel-molybdenum-chromium-iron alloys with UNS Nos. N10003 and N10242 for use in general corrosive service. Specimens shall be sampled and prepared, then tested accordingly to examine ... -
Standard Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing
Abstract: This specification establishes the requirements for brass strips in narrow widths and light gages produced from Copper Alloy UNS Nos. C23000, C26000, and C26130 to be used in heat exchanger tubing. The material for manufacture ... -
Standard Terminology Relating to Electrical Contacts and Their Use
Abstract: 2.1 The terms in this standard are used in standards and literature related to electric contacts, materials for electric contacts and test methods for evaluating electric contacts. These terms may be difficult to locate ... -
Standard Specification for Welded Nickel-Chromium-Aluminum Alloy and Nickel-Chromium-Iron Alloy Tubes
Abstract: This specification covers the standard requirements for welded nickel-chromium-iron alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045) boiler, heat exchanger, and condenser tubes for use in general corrosion resisting ... -
Standard Test Method for Tap Density of Metal Powders and Compounds
Abstract: 4.1 This test method covers the evaluation of the tap density physical characteristic of metal powders and related compounds. The measured tap density bears a relationship to the mass of powder that will fill a fixed volume ... -
Standard Specification for Gold Electrical Contact Alloy
Abstract: This specification covers a gold-rich, age-hardenable alloy in rod, wire, and strip form applicable to electrical contacts. The material shall be finished by cold working, annealing, turning, grinding, and age hardening. ... -
Standard Practice for Installation and Use of Reflective Insulation in Building Constructions
Abstract: 4.1 This practice recognizes that effectiveness, safety, and durability of reflective insulation depends not only on the quality of the insulating materials, but also on proper installation. 4.2 There is potential for ... -
Standard Specification for Metallic Coated or Aluminum Clad Stranded Steel Core for Use in Overhead Electrical Conductors
Abstract: This specification covers zinc-coated (galvanized), zinc-aluminum-mischmetal alloy-coated, and aluminum-coated (aluminized) stranded steel wire core inserted for use in aluminum conductors, steel reinforced (ACSR). Prior ... -
Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section
Abstract: 4.1 Coating thickness is an important factor in the performance of a coating in service and is usually specified in a coating specification. 4.2 This method is suitable for acceptance testing. -
Standard Specification for Nickel-Chromium-Molybdenum-Niobium Alloy, Nickel-Chromium-Molybdenum-Silicon Alloy, and Nickel-Chromium-Molybdenum-Tungsten Alloy Rod and Bar
Abstract: This specification covers nickel-chromium-molybdenum-columbium (UNS N06625), nickel-chromium-molybdenum-silicon alloy (UNS N06219), and nickel-chromium-molybdenum-tungsten alloy (UNS N06650) in the form of hot-worked rod ... -
Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy Round Weaving Wire
Abstract: This specification covers UNS N08020, UNS N08026, and UNS N08024 round weaving wire. The material shall undergo solution-annealing heat treatment. The wire shall be annealed or cold drawn as a final operation to produce ... -
Standard Practice for Preparation of Titanium and Titanium Alloys for Electroplating
Abstract: 3.1 Electroplated metals are used on titanium to enhance and improve its surface characteristics, such as, but not limited to; hardness, anti-galling, wear resistance and corrosion resistance. Effectively preparing titanium ... -
Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy Bar and Wire
Abstract: This specification covers UNS N08020, UNS N08026, and UNS N08024 nickel alloy bar and wire. The alloys shall be furnished in the stabilized-annealed condition, solution-annealed condition, or annealed condition. The material ... -
Standard Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube
Abstract: 4.1 The rectangular or square copper alloy tube covered by this test method may be used in applications in which control of twist is important to proper fit in final assembly and to minimize rework to bring the tube into ... -
Standard Specification for Copper-Nickel Alloy Castings
Abstract: This specification establishes the requirements for threadless, seamless, and deoxidized copper pipes in straight lengths, in all nominal or standard pipe sizes, for piping systems that are assembled with brazed-joint pipe ...