درباره ما
AASHTO GPSS-1
Guide for Painting Steel Structures
Year: 1997
Abstract: Painting Bare Steel
a.Shop Painting
For the purposes of this Guide, repainting steel from an existing bridge that is returned to a shop qualified to clean existing steel by blast cleaning to an acceptable surface condition (see section 11) and recoating is subject to the same requirements as newly fabricated steel.
A shop may be either a permanent painting shop that may be part of a steel fabricator's plant, a separate painting shop, or a temporary shop constructed at or near the bridge site to repaint the steel where environmental conditions during paint application will be within the recommended temperature and humidity ranges. A covered shelter does not necessarily constitute a shop.
The shop-applied coating may include an initial coat or multiple coats as specified by the Owner or, if acceptable to the Owner, as elected by the Contractor.
b. Field Painting
This Guide contains requirements, including applicable environmental regulations, for the Contractor to meet, when field painting of new structural steel is specified or allowed.
a.Shop Painting
For the purposes of this Guide, repainting steel from an existing bridge that is returned to a shop qualified to clean existing steel by blast cleaning to an acceptable surface condition (see section 11) and recoating is subject to the same requirements as newly fabricated steel.
A shop may be either a permanent painting shop that may be part of a steel fabricator's plant, a separate painting shop, or a temporary shop constructed at or near the bridge site to repaint the steel where environmental conditions during paint application will be within the recommended temperature and humidity ranges. A covered shelter does not necessarily constitute a shop.
The shop-applied coating may include an initial coat or multiple coats as specified by the Owner or, if acceptable to the Owner, as elected by the Contractor.
b. Field Painting
This Guide contains requirements, including applicable environmental regulations, for the Contractor to meet, when field painting of new structural steel is specified or allowed.
Show full item record
| contributor author | AASHTO - American Association of State Highway and Transportation Officials | |
| date accessioned | 2017-09-04T18:05:55Z | |
| date available | 2017-09-04T18:05:55Z | |
| date copyright | 01/01/1997 | |
| date issued | 1997 | |
| identifier other | GKYJCAAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/188877 | |
| description abstract | Painting Bare Steel a.Shop Painting For the purposes of this Guide, repainting steel from an existing bridge that is returned to a shop qualified to clean existing steel by blast cleaning to an acceptable surface condition (see section 11) and recoating is subject to the same requirements as newly fabricated steel. A shop may be either a permanent painting shop that may be part of a steel fabricator's plant, a separate painting shop, or a temporary shop constructed at or near the bridge site to repaint the steel where environmental conditions during paint application will be within the recommended temperature and humidity ranges. A covered shelter does not necessarily constitute a shop. The shop-applied coating may include an initial coat or multiple coats as specified by the Owner or, if acceptable to the Owner, as elected by the Contractor. b. Field Painting This Guide contains requirements, including applicable environmental regulations, for the Contractor to meet, when field painting of new structural steel is specified or allowed. | |
| language | English | |
| title | AASHTO GPSS-1 | num |
| title | Guide for Painting Steel Structures | en |
| type | standard | |
| page | 98 | |
| status | Withdrawn | |
| tree | AASHTO - American Association of State Highway and Transportation Officials:;1997 | |
| contenttype | fulltext |