NASA - National Aeronautics and Space Administration (NASA): Recent submissions

Now showing items 1601-1620 of 3613

    • NASA-LLIS-0897 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;2000
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: Description of Driving Event:
      Changes to an approved LV/SC ICD are submitted via an Interface Revision Notice (IRN) document. The existing formal approval process requires the signatures of NASA-GSFC ...
      Subject(s) : Configuration Management , Launch Vehicle , Spacecraft ,

    • NACA-TR-733 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;1942
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: A chart is presented for the values of the coefficient in the formula for the critical compressive stress at which buckling may be expected to occur in flat rectangular plates supported along all edges and, in addition, ...
      Subject(s) : ALLOYS , ALUMINUM , ANALYSIS , BUCKLING , COEFFICIENTS , COMPRESSION , CONSTRAINTS , CRITICAL , DIFFERENTIAL , EDGE , EDGES , ELASTIC , EQUATIONS , FLANGES , FLAT , FORMULAS , LOADING , LOADS , MATHEMATICS , PLATES , PROPERTIES , RECTANGULAR , SUPPORTS ,

    • NACA-TN-3529 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;1955
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: An investigation of the effects of plan-form taper on the aerodynamic characteristics of a series of wings having various tapers, aspect ratios, and thicknesses was conducted in the Ames 16-foot high-speed wind tunnel, ...

    • NASA-LLIS-2037 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;2010
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: Pulse width modulator circuit card assemblies (PWM CCAs), valued at $150,000 each were inadvertently excessed to the KSC excess property storage area. The PWM CCAs were attached to holding fixtures, and were subsequently ...

    • NASA-LLIS-4880 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;2012
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: During the Constellation program, each project procured material to support vehicle integration/maintenance tasks separately. Each project was a different contract. Since the Federal Acquisition Regulation (FAR) does not ...

    • NASA-LLIS-2556 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;2011
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: Space Shuttle processing operations were significantly more complicated and costly than planned in the original concept of operations because operational requirements were not defined sufficiently during the program's ...
      Subject(s) : Engineering design and project processes and standards , Ground support systems , Long-term sustainability and maintenance planning , Mission and systems trade studies , Systems analysis – cost analysis ,

    • NACA-ARR-3E25 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;1943
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: INTRODUCTION
      At the request of the Army Air Forces, Material Command, measurements were made of the pressures on the tail surfaces of the Republic Aviation Corporation P-47B airplane in the NACA full-scale tunnel. The ...

    • NASA-LLIS-0515 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;1994
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: Description of Driving Event:
      High-temperature strain gage development in GWP Number 29 at NASA Langley was the topic of a paper presented at the annual NASP Technology Review Conference in Monterey, ...
      Subject(s) : Research & Development ,

    • NASA-LLIS-1345 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;2003
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: Description of Driving Event:
      The Project underwent several significant transitions including going from a proposal team to an implementation/project team; Principal Investigator (PI)lead academic or ...
      Subject(s) : Administration/Organization , Air-Traffic Management , Configuration Management ,

    • NASA NPR 1600.3 W/CHG 2 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;2013
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: Purpose
      a. This NASA Procedural Requirement (NPR) establishes the Agency-wide personnel security program implementation requirements set forth in NASA Policy Directive (NPD) 1600.2E, NASA Security ...

    • NACA-TN-2001 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;1956
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: The experimental investigation of damping screens described screens described herein was undertaken primarily to test theories of the effects of damping screens and to obtain information on the performance of screens in ...

    • NASA-LLIS-4584 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;2012
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: In the Constellation Program (CxP), the consideration for utilizing a Configuration Status Accounting (CSA) tool was not taken into account during the early parts of the program development cycle. This resulted in Projects ...

    • NASA-LLIS-0907 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;2000
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: Description of Driving Event:
      The POES Program made a decision to embellish an instrument by incorporating a new scanner design. This new design was to replace a weak motor with a stronger one that ...
      Subject(s) : Configuration Management , Flight Equipment , Parts Materials & Processes , Risk Management/Assessment ,

    • NASA-LLIS-3262 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;2010
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: Abstract:
      In November 2009, United Space Alliance published the "Constellation Launch Control System Operations Assessment Trade Study." This trade study highlighted many current and historical risks ...
      Subject(s) : Additional Categories. , Additional Categories.Hardware , Additional Categories.Human Factors , data management , Engineering Design (Phase C/D). , Engineering Design (Phase C/D).Launch Systems , maintenance , Mission Operations and Ground Support Systems. , Mission Operations and Ground Support Systems.Ground support systems , Mission Operations and Ground Support Systems.Launch support systems , Mission Operations and Ground Support Systems.Logistics and , Mission Operations and Ground Support Systems.Training and simulation , Missions and Systems Requirements Definition. , Missions and Systems Requirements Definition.Configuration control and , Program Management. , Program Management.Configuration and data management , requirements and designs , Safety and Mission Assurance. , Safety and Mission Assurance.Impact of human factors on systems , Safety and Mission Assurance.Maintenance , Safety and Mission Assurance.Reliability , systems , Systems Engineering and Analysis. , Systems Engineering and Analysis.Human factors planning , Systems Engineering and Analysis.Mission and systems trade studies ,

    • NASA-LLIS-1140 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;2000
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: Description of Driving Event:
      Workforce Attrition Driving the Use of Less Experienced Personnel
      Subject(s) : Administration/Organization , Aerospace Safety Advisory Panel , Human Resources & Education , Policy & Planning ,

    • NASA-LLIS-0733 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;2000
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: Practice:
      A formal procedure is followed in the reporting and documentation of problems/failures occurring during test, pre-launch operations, and launch operations for both hardware and software. A ...

    • NACA-TR-589 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;1937
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: The aerodynamic and mass factors governing lateral stability are discussed and formulas are given for their estimation. Relatively simple relationships between the governing factors and the resulting stability characteristics ...

    • NASA-LLIS-1835 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;2007
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: Abstract:
      A July 2007 workshop attended by the former Grumman Corporation's Apollo Lunar Module Reliability and Maintainability (R&M) Team and Constellation Program personnel traced the success of the ...
      Subject(s) : Engineering Design (Phase C/D). , Engineering Design (Phase C/D).Crew Survival Systems , Engineering Design (Phase C/D).Environmental Control and Life Support Systems , Engineering Design (Phase C/D).Human Health/Flight Medicine , Engineering Design (Phase C/D).Lander Systems , Engineering Design (Phase C/D).Power , Engineering Design (Phase C/D).Spacecraft and Spacecraft Instruments , Mission Operations and Ground Support Systems. , Mission Operations and Ground Support Systems.Ground support systems , Mission Operations and Ground Support Systems.Lunar Operations , Mission Operations and Ground Support Systems.Mission control Planning , Missions and Systems Requirements Definition. , Missions and Systems Requirements Definition.Level 0/1 Requirements , Missions and Systems Requirements Definition.Mission concepts and life-cycle planning , Missions and Systems Requirements Definition.Vehicle concepts , Program Management. , Program Management.Contractor relationships , Program Management.Cross Agency coordination , Safety and Mission Assurance. , Safety and Mission Assurance.Early requirements and standards definition , Safety and Mission Assurance.Reliability ,

    • NACA-TR-1284 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;1956
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: The relation of Whitcomb's "area rule" to the linear formulas for wave drag at lightly supersonic speeds is discussed. By adopting an approximate relation between the source strength and the geometry of a wing-body ...
      Subject(s) : AIRCRAFT , BODY , COMPARISON , CONFIGURATIONS , DRAG , ELLIPTICITY , EQUATIONS , EXPERIMENTATION , FORMULAS , FUSELAGES , LINEAR , MATHEMATICAL , MODELS , REDUCTION , SHAPES , SPEED , SUPERSONIC , THEORIES , WAVE , WING , WINGS ,

    • NASA-TN-D-2042 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;1963
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: Afterbody geometry and sting diameter effect on aerodynamics of slender bodies at supersonic speed
      Subject(s) : AERODYNAMIC , AERODYNAMICS , AFTERBODIES , AFTERBODY , BOATS , BODIES , BODY , CHARACTERISTICS , MACH , MOUNTING , NUMBER , SLENDER , SPEED , SUPERSONIC ,