Now showing items 1361-1380 of 2147

    • W-L-101/112A 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1977
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification sheet was approved by the Commissioner, Federal Supply Service, General Services Administration, for the use of all Federal agencies.
      (This specification sheet forms a part of the latest issue of ...
    • MIL-W-81822/6A (1) 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1994
      Organization : NAVY - AS - Naval Air Systems Command
    • MIL-C-85578 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1982
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification establishes the requirements for the manufacture and acceptance of the AN/DLQ-5(V) Countermeasures Set, referred to herein as the set. Intended Use: The AN/DLQ-5(V) Countermeasures Set is ...
    • MS21341 REV H 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;2012
      Organization : NAVY - AS - Naval Air Systems Command
    • MIL-DTL-22442/3B 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1998
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification sheet is approved for use by the Naval Air Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
      The requirements for acquiring ...
    • FED-STD-3 (1) 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1951
      Organization : NAVY - AS - Naval Air Systems Command
    • MIL-T-81772B 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1986
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification covers the requirements for three types of thinner to be used in reducing aircraft coatings. Intended Use: The thinner covered by this specification is intended for use in reducing aircraft ...
    • MIL-C-7115/3B 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1991
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification is approved for use by the Naval Air Systems Command, Department of the Navy and is available for use by all Departments and Agencies of the Department of Defense.
      The complete requirements for ...
    • MIL-B-81793/22 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1993
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification is approved, for use by all Departments and Agencies of the Department of Defense.
      The requirements for acquiring the product described herein shall consist of this specification sheet and the issue ...
    • MIL-I-81969/21 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1976
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
      The complete requirements for procuring the tool described herein shall consist of this document and the latest issue ...
    • MIL-DTL-25427/5 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;2009
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: Intended Use: This plug is used as part of the hose attaching coupling half assembly attached to ground support equipment protecting the hydraulic systems from dust and other foreign objects.
    • MIL-T-81624 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1969
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification states the general performance requirements for all aircraft television displays used in conjunction with Guided Weapon Mk 1 Mod 0 and Mod 2 (WALLEYE). Only WALLEYE television display requirements are ...
    • MIL-F-45400A 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1968
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification covers an extensible fin for use with a 4-pound incendiary bomb.
    • MIL-D-22612C 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1980
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification establishes the requirements for three types of contaminated fuel detectors.
      The contaminated fuel detectors covered by this specification shall be classified as follows:
                Type ...
    • MIL-STD-2073-1E CHANGE 1 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;2011
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: Purpose. This document outlines standard processes for the development and documentation of military packaging. This standard covers methods of preservation to protect materiel against environmentally induced corrosion ...
      Subject(s) : Cleaning , Containers , Drying , Inspection , Marking for shipment , Methods of preservation , Packaging code development , Packaging data forms , Packaging design validation provisions , Packaging requirements , Preservation , Preservatives , Procedural requirements , Quality assurance , Quantity per unit pack , Testing ,
    • MIL-N-81497A VALID NOTICE 1 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1988
      Organization : NAVY - AS - Naval Air Systems Command
    • VV-D-1078B NOTICE 3 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;2008
      Organization : NAVY - AS - Naval Air Systems Command
    • MIL-DTL-25427B 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;2009
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification covers the detailed requirements for aircraft hydraulic self sealing quick disconnect coupling for use in types I and II hydraulic systems (-65 °F to +275 °F temperature range) as defined by ...
      Subject(s) : Ground support equipment ,
    • MIL-M-81957/5 (1) 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1979
      Organization : NAVY - AS - Naval Air Systems Command
    • MIL-DTL-22442/8B VALID NOTICE 1 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;2005
      Organization : NAVY - AS - Naval Air Systems Command